Philips VRZ250AT Rerecording Tape Duplication, Channel the CH3/CH4 switch on VCR 2 is set to

Page 32

VRZ220/250 layout 4/8/99 10:11 PM Page 32

32 Rerecording (Tape Duplication)

The instructions on this page show you how to copy tapes. The illustration uses two VRZ250 VCRs. Different VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1 - 7.

1.Audio cables from AUDIO OUT Jacks of VCR 1 to AUDIO IN Jacks of VCR 2

	VCR 1
	Playing VCR
	AUDIO		ANT
	AUDIO		IN
		L	IN
		L
	OUT	IN
		R
	VIDEO		OUT
	OUT	IN CH3	CH4

VCR 2 - Recording VCR

AUDIO		ANT
AUDIO		IN
	L
OUT	IN
	R
VIDEO		OUT
OUT	IN CH3	CH4

2.Video cable from VIDEO OUT Jack of VCR 1 to VIDEO IN Jack of VCR 2

●Audio and Video cables are not supplied.

3.RF coaxial cable from VCR’s OUT Jack to TV’s

ANTENNA IN

Jack

1

Make the connections shown above.

2

VCR 1 will play your tape. Put a prerecorded tape in VCR 1.

3

VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.)

4

Turn on the TV and set it to channel 03 or 04, whichever

channel the CH3/CH4 switch on VCR 2 is set to.

5

Point the remote control at VCR 2. Press Number buttons 0, 0 to select Line Input. A/V IN will appear on-screen.

6

Use the SPEED button to select SP, LP, or SLP at VCR 2.

7

Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time.

To stop recording, press the STOP/EJECT button on VCR 1, then press the STOP/EJECT button on VCR 2.

Helpful Hints

•Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

•The VCR in the figure above is the VRZ250. If you have the VRZ220, use a single-plug audio cable to con- nect the AUDIO OUT Jack on VCR 1 to the AUDIO IN Jack on VCR 2.

Image 32

Contents VRZ220AT VRZ250AT Dear Philips Magnavox product owner For Customer UseFeatures IntroductionTable of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR CH3Recording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast SystemConnections RF coaxial Cable TV’s Antenna Jack Recording One Channel/Watching AnotherCable Box/DBS VRZ220 Hookups With a Stereo TVVRZ250 Press the Menu button. The display shown below will appear Turning on Your VCR2Turn on the TV Automatic Channel Setup Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitFollow the steps below to set your VCR’s clock. Make sure You make each entry within 60 seconds of the previous entryDaylight-Saving Time Language Selection Remote Control Buttons Power ButtonTime Search Button VRZ250 only Menu ButtonRemote Control Buttons cont’d Eject ButtonPress to eject the tape Clear ButtonOn-Screen Status Displays Status Display example onlyIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing Read and follow the steps below to play a tapeRecording 1Turn on the TV 2Insert a tape in the VCRRemote control to select channel 03 or 04 at the TV Recording One Channel/Watching AnotherTo return to the channel being recorded, use the TV Press the VCR/TV button to put the VCR in VCR posiSet up the channels at the VCR One-Touch RecordingTimer Recording DailyTimer Recording cont’d Slots will flash on-screenPress the STATUS/EXIT button. Program WAS COM Tape SpeedsTape Speed Maximum Record/Playback Time Type T160 T120 T60 Standard PlayChecking or Cancelling Timer Recordings Press the PLAY/o button or the STOP/p button to selectPROGRAM, then press the F.FWD/B button Program REVIEW, then press the F.FWD/B buttonTurn on the TV and set it to channel 03 or 04, whichever Channel the CH3/CH4 switch on VCR 2 is set toRerecording Tape Duplication Repeat Play Press the F.FWD/B button so that on appears besideTime Search VRZ250 only Press the Time Search buttonReal-Time Counter Memory Special Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Understanding On-Screen Displays MonoMonitor Or ReceiverMulti-Channel Television Sound System VRZ250 only cont’d Hi-Fi Stereo Sound System VRZ250 only Please see additional notes onHi-Fi Stereo Sound System VRZ250 only cont’d Helpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel 03 orSpecifications Limited Warranty Model # Serial #Index Supplied Accessories