Philips VRZ220AT, VRZ250AT owner manual One-Touch Recording, Set up the channels at the VCR

Page 27

VRZ220/250 layout 4/8/99 10:11 PM Page 27

The One-Touch Recording feature allows you to set an immediate timed recording 30 minutes to eight hours long. Before you begin:

●Set up the channels at the VCR.

●Select a recording speed (SP, LP, SLP) with the SPEED button.

●Put a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).

●Place the VCR in VCR position. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.)

1

Press the CHANNEL o/p buttons or the Number but- tons to select the channel you want to record.

2

Press the REC(ord)/OTR button repeatedly until the desired recording length (30 minutes to eight hours) appears on-screen. Recording will begin immediately. The REC light and the TIMER light will appear on the display panel.

OTR (0:30)

CH12

3

To stop an OTR before recording is finished, press the STOP/p button or the POWER button.

To cancel the OTR but continue recording, press the REC(ord)/OTR button repeatedly until REC appears in the upper left corner of the TV screen. (STATUS must be set to ON. Details are on page 20.) The REC light will remain on the display panel of the VCR, but the TIMER light will disappear.

One-Touch Recording 27

POWERVCR/TV EJECT

	1	2		3	1
	1	2		3
3	4	5		6
3	7	8		9	CHANNEL
	7	8		9
		0	+100
	SPEED	TIME SEARCH			MEMORY
	MENU	STATUS/EXIT	CLEAR		SLOW
	REWIND	/PLAY			F.FWD
	REC/OTR	/STOP			PAUSE/STILL

2

Helpful Hints

•To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button.

•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired length appears on-screen.

•If you begin an OTR when another recording is paused, the OTR will begin.

•You can not pause an OTR.

•If the preset time for a timer recording comes up during an OTR, the OTR has priority. The timer recording will not take place.

•If the end of the tape is reached during a One-Touch Recording, the VCR will eject the tape and turn itself off. The TIMER light will flash until you turn on the VCR.

Image 27

Contents VRZ220AT VRZ250AT For Customer Use Dear Philips Magnavox product ownerIntroduction FeaturesTable of Contents Before Using Your VCR Disconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemCH3 Plug in the TV and the VCRHookups With a Cable Box / Direct Broadcast System ConnectionsRecording/Viewing Any Channel Recording One Channel/Watching Another Cable Box/DBSRF coaxial Cable TV’s Antenna Jack Hookups With a Stereo TV VRZ250VRZ220 Turning on Your VCR 2Turn on the TVPress the Menu button. The display shown below will appear Press the Menu button Automatic Channel SetupAdding/Deleting Channels Automatic Channel Setup cont’dPress the STATUS/EXIT button once or twice to exit Reviewing Memorized ChannelsYou make each entry within 60 seconds of the previous entry Follow the steps below to set your VCR’s clock. Make sureDaylight-Saving Time Language Selection Menu Button Remote Control ButtonsPower Button Time Search Button VRZ250 onlyClear Button Remote Control Buttons cont’dEject Button Press to eject the tapeIf you select Status ON, then select Counter only OFF On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only onVCR Display Panel Front Panel Rear Panel Read and follow the steps below to play a tape Playing1Turn on the TV 2Insert a tape in the VCR RecordingPress the VCR/TV button to put the VCR in VCR posi Remote control to select channel 03 or 04 at the TVRecording One Channel/Watching Another To return to the channel being recorded, use the TVOne-Touch Recording Set up the channels at the VCRDaily Timer RecordingSlots will flash on-screen Timer Recording cont’dStandard Play Press the STATUS/EXIT button. Program WAS COMTape Speeds Tape Speed Maximum Record/Playback Time Type T160 T120 T60Program REVIEW, then press the F.FWD/B button Checking or Cancelling Timer RecordingsPress the PLAY/o button or the STOP/p button to select PROGRAM, then press the F.FWD/B buttonChannel the CH3/CH4 switch on VCR 2 is set to Rerecording Tape DuplicationTurn on the TV and set it to channel 03 or 04, whichever Press the F.FWD/B button so that on appears beside Repeat PlayPress the Time Search button Time Search VRZ250 onlyReal-Time Counter Memory Viewing a Still Picture Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPAutomatic Operation Features Or Receiver Understanding On-Screen DisplaysMono MonitorMulti-Channel Television Sound System VRZ250 only cont’d Please see additional notes on Hi-Fi Stereo Sound System VRZ250 onlyHi-Fi Stereo Sound System VRZ250 only cont’d Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel 03 or GlossarySpecifications Model # Serial # Limited WarrantyIndex Supplied Accessories