Philips VRZ250AT, VRZ220AT Hi-Fi Stereo Sound System VRZ250 only, Please see additional notes on

VRZ220/250 layout 4/8/99 10:12 PM Page 40

40 Hi-Fi Stereo Sound System (VRZ250 only)

Multi-Channel Television Sound system broadcasts are automati-	2-3
cally recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo the
tapes recorded in Hi-Fi stereo, however, you’ll need to follow
steps 1 - 9.

1

Press the MENU button.

2

Press the PLAY/o button or the STOP/p button to select VCR SET UP, then press the F.FWD/B button.

SELECT op CHOOSE B

→ REPEAT PLAY	OFF
ON SCREEN MODE
AUDIO OUT
LANGUAGE
TO END PUSH EXIT

3

Press the PLAY/o button or the STOP/p button to select AUDIO OUT, then press the F.FWD/B button.

SELECT op
→ HIFI	ON
MONO
TO END PUSH EXIT

4

Press the PLAY/o button or the STOP/p button to select HIFI. ON will appear to the right of HIFI on-screen.

SELECT op
→ HIFI	ON
MONO
TO END PUSH EXIT

5

Press the STATUS/EXIT button.

	POWER		VCR/TV	EJECT
	1	2	3
	4	5	6
	7	8	9	CHANNEL
5		0	+100
	SPEED	TIME SEARCH		MEMORY
1	MENU	STATUS/EXIT	CLEAR	SLOW
	REWIND	/PLAY		F.FWD
4	REC/OTR	/STOP		PAUSE/STILL

Helpful Hints

•All programs are automatically recorded in both Hi-Fi stereo sound and in monaural sound.

•The audio level of a tape recorded in Hi-Fi stereo will differ from the audio level of a tape not recorded in Hi-Fi stereo.

•Normally, HIFI should be selected from the AUDIO OUT menu for playback with Hi-Fi sound. But, you can change the selection to MONO if you want monaural audio play- back. To do this, follow steps 1 - 3 above. At step 4, press the PLAY/o button or the STOP/pbutton to select MONO. Press the STATUS/EXIT button. HIFI will dis- appear from the status display.

•If you play non-Hi-Fi tapes while the VCR is set to HIFI, HIFI will disap- pear from the status display and the tape will play in monaural sound.

Please see additional notes on page 43.