Philips VRZ250AT On-Screen Status Displays, Status Display example only, If you select Status OFF

Page 20

VRZ220/250 layout 4/8/99 10:11 PM Page 20

20 On-Screen Status Displays

A status display will appear when you press the STATUS/EXIT button or certain function buttons. The contents of the status dis- play will vary. To choose the status display mode, follow the steps below.

If you select STATUS ON, then select COUNTER ONLY ON:

●Whenever you press the STOP/p button or the PLAY/o but- ton, the status display will appear for five seconds. After five seconds, only the counter will remain on-screen. You must

press the STATUS/EXIT button to remove it.

If you select STATUS ON, then select COUNTER ONLY OFF:

●Whenever you press the STOP/p button or the PLAY/o but- ton, the status display will appear for five seconds.

If you select STATUS OFF:

●The status display will not appear when you press function but- tons. You must press the STATUS/EXIT button to see the sta- tus display.

1

Press the MENU button.

2

Press the PLAY/o button or the STOP/p button to select VCR SET UP, then press the F.FWD/B button.

3

Press the PLAY/o button or the STOP/p button to select ON SCREEN MODE, then press the F.FWD/B button.

4

Press the PLAY/o button or the STOP/p button to select STATUS, then press the F.FWD/B button so that OFF (or ON) appears beside STATUS.

SELECT op CHOOSE B

→ STATUS	[ON]
COUNTER ONLY	[OFF]

TO END PUSH EXIT

5

If you set STATUS to OFF, go to step 6. If you set STA- TUS to ON, press the PLAY/o button or the STOP/p button to select COUNTER ONLY, then press the F.FWD/B button so that OFF (or ON) appears beside it.

6

Press the STATUS/EXIT button.

Status Display (example only)

Receiving and Recording Mode (VRZ250 only)

Button

Channel

Pressed

Time

STOP

12:00 AM

TV STEREO

CH10

STEREO

2ND AUD

SLP

M

1:23:45

HIFI

Tape

Counter

Audio

Speed

and

Out

Counter

Mode

Memory

(VRZ250 only)

MTS Broadcast Available (VRZ250 only)

Helpful Hints

•If the channel you select has no broadcast, the screen will become solid blue.

•You may not access a status display when viewing a still picture, during slow motion playback (VRZ250 only), or when the F.FWD/B or REWIND/s button is pressed dur- ing playback.

Image 20

Contents VRZ220AT VRZ250AT Dear Philips Magnavox product owner For Customer UseFeatures IntroductionTable of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR CH3Recording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast SystemConnections RF coaxial Cable TV’s Antenna Jack Recording One Channel/Watching AnotherCable Box/DBS VRZ220 Hookups With a Stereo TVVRZ250 Press the Menu button. The display shown below will appear Turning on Your VCR2Turn on the TV Automatic Channel Setup Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitFollow the steps below to set your VCR’s clock. Make sure You make each entry within 60 seconds of the previous entryDaylight-Saving Time Language Selection Remote Control Buttons Power ButtonTime Search Button VRZ250 only Menu ButtonRemote Control Buttons cont’d Eject ButtonPress to eject the tape Clear ButtonOn-Screen Status Displays Status Display example onlyIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing Read and follow the steps below to play a tapeRecording 1Turn on the TV 2Insert a tape in the VCRRemote control to select channel 03 or 04 at the TV Recording One Channel/Watching AnotherTo return to the channel being recorded, use the TV Press the VCR/TV button to put the VCR in VCR posiSet up the channels at the VCR One-Touch RecordingTimer Recording DailyTimer Recording cont’d Slots will flash on-screenPress the STATUS/EXIT button. Program WAS COM Tape SpeedsTape Speed Maximum Record/Playback Time Type T160 T120 T60 Standard PlayChecking or Cancelling Timer Recordings Press the PLAY/o button or the STOP/p button to selectPROGRAM, then press the F.FWD/B button Program REVIEW, then press the F.FWD/B buttonTurn on the TV and set it to channel 03 or 04, whichever Channel the CH3/CH4 switch on VCR 2 is set toRerecording Tape Duplication Repeat Play Press the F.FWD/B button so that on appears besideTime Search VRZ250 only Press the Time Search buttonReal-Time Counter Memory Special Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Understanding On-Screen Displays MonoMonitor Or ReceiverMulti-Channel Television Sound System VRZ250 only cont’d Hi-Fi Stereo Sound System VRZ250 only Please see additional notes onHi-Fi Stereo Sound System VRZ250 only cont’d Helpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel 03 orSpecifications Limited Warranty Model # Serial #Index Supplied Accessories