Selecting Monitor Sound
(For VR607/55 only)
If you want to change the sound you listen to while playing back a HiFi stereo or bilingual tape, press AUDIO repeatedly.
Each time you press the button, the sound changes as follows:
HiFi stereo =HiFi left channel =HiFi right channel =Monaural sound on normal audio track.
HIFI:
Normally select this mode.
You can play back a HiFi tape in HiFi stereo mode and monaural tape in monaural mode.
HIFI L:
Select this mode when you want to play back the sound recorded on HiFi left channel (usually main language) of a bilingual programme.
HIFI R:
Select this mode when you want to play back the sound recorded on HiFi right channel (usually
NORMAL MONO:
Select this mode when you want to play back the sound recorded on the normal audio track of the tape.
Note:
•The connections described in “VCR to AV TV Connection” ( ✈P.4) are required for HiFi stereo
playback.
One Touch Recording (OTR)
The OTR function lets you quickly specify how long you want a recording to continue. You do not have to programme the timer.
Make sure....
•The record tab on the cassette is not removed.
•Your VCR, TV and antenna are connected correctly.
❍1 On TV
1Turn on the TV.
2Select the video channel (or AV mode).
❍2 On VCR
Insert a cassette with the record tab in place. The VCR turns on.
•If a cassette is already in the VCR, turn on the VCR.
❍3 Select Channel
Press CH 5/∞or Number buttons to select the channel to record.
•You can also use the 1 REW/CH- and ¡FF/ CH+ on the front panel. However, press CH before pressing these buttons.
❍4 Start OTR
Press REC/OTR ● twice.
Recording starts immediately, and the REC indicator will blink on the display.
OTR(0:30)
CH12
This indicates that the VCR will automatically shut off after 30 minutes of recording.
SP
❍5 Select Recording Length
Press REC/OTR ● repeatedly until the desired recording length appears.
Each time you press the button, recording length increases in
=0:30=1:00=1:30.....5:30=6:00
REC (Normal recording)+
To check time remaining during an OTR Press OK/STATUS.
To change the recording length during an
OTR
Press REC/OTR ● repeatedly until the desired length appears.
To cancel an OTR
Press STOP 7to stop recording before the preset recording length is reached. If you want to cancel the OTR mode but continue recording, press REC/ OTR ● several times until “OTR” changes to “REC” on the TV screen.
Notes:
•During recording, the displayed time counts down. When “0:00” is reached, recording stops and the VCR turns off automatically.
•If an OTR is engaged during pause, the displayed time counts down normally, but recording does not begin until you cancel the pause.
11