Philips VR455, VR 655 Playback On TV, On VCR, Start Playback, Select Tape Speed, Select a Channel

Page 8

Basic Operations

 

Playback

 

 

1

 

 

 

 

 

On TV

1

 

1

Turn on the TV.

 

 

 

On TV

 

2

Select the video channel (or AV mode).

 

1Turn on the TV.

2Select the video channel (or AV mode).

2 On VCR

2 On VCR

Insert a cassette with the record tab in place. The VCR turns on.

Insert a cassette. The VCR turns on.

If the record tab on a cassette is removed, playback will start automatically.

If a cassette is already in the VCR, turn on the VCR.

3 Start Playback

Press PLAY.

To pause playback and view still picture, press

STILL/SLOW.

Press PLAY to resume playback.

To rapidly locate a particular scene

Press FF (or ¡FF/CH+ on the front panel) or REW (or 1 REW/CH- on the front panel) during playback.

(No sound comes out.)

Press PLAY to resume playback.

To stop playback,

Press STOP (or STOP/EJECT /0on the front panel)

To rewind the tape,

Press REW (or 1 REW/CH- on the front panel) when the tape is not running.

To fast forward the tape,

Press FF (or ¡FF/CH+ on the front panel) when the tape is not running.

To eject the tape,

Press 0EJECT (or STOP/EJECT /0on the front panel).

To turn off the VCR,

Press fVCR (or POWER on the front panel).

To rewind the tape, press REW 2.

To reset time counter, press CLEAR.

3 Select Tape Speed

Press SPEED until the desired tape speed (SP or LP) appears on the screen.

4 Select a Channel

Press CH 5/or Number buttons to select the channel to record.

5 Start Recording

Press REC/OTR .

To pause recording

Press STILL/SLOW briefly. To resume recording, press the same button again. To stop recording

Press STOP .

To watch another TV programme while record- ing

Select a different channel you want to watch on the TV.

You can watch the programme of the selected channel on the TV, without affecting recording on the VCR.

When a tape reaches its end during recording, the recording stops and CASS indicator blinks on the display window.

Recording

When using this VCR, an index mark is always marked at the beginning of every recording. This index marks make it easier for you to search for the beginning of the recordings. See Index Search on page 9.

To prevent accidental erasure:

Break off the record tab with a screwdriver.

To record again, cover the hole with adhesive tape.

8

Image 8
Contents VR407/55 VR607/55 Do not block the VCRs ventilation openings or holesFront panel Rear panelDisplay Window On- Screen DisplayRemote Control ALT button Skip Search button P.9VR607/55 VCR to TV Connection Using AUDIO/VIDEO CableVR407/55 Setting the Video Channel Initial Set UpMenu Operations Select the LanguageSetting the Clock/Date To Reset the Time or LanguageInitial Set Up will not start in the following cases Select TV SystemTo Delete or Edit Receivable Channels To Reset the ChannelsManual Channel Setting Playback On TV On VCRStart Playback Select Tape SpeedTracking Adjustments Special Effect PlaybacksIndex Search Auto trackingSelect SmartPicture Mode Automatic OperationsChild Lock SmartPictureSelecting Monitor Sound One Touch Recording OTRSelect Channel Start OTRUsing On-Screen Display Select VCR Set Up ModeSelect On-Screen Mode Finish SettingFinish Settings When two programs overlapSelect Start Date Confirm ProgrammeHow to see the programme list Tape DuplicationPower Remote Control CorrectionCorrection Recording & PlaybackSpecifications Mains voltage