Using On-Screen Display
You can display the VCR operating status on the TV screen.
❍1 Select VCR Set Up Mode
1Press VCR.
2Press MENU.
3Press PLAY 5or STOP ∞to select “VCR SET UP” then press OK/STATUS.
❍2 Select On-Screen Mode
1Press PLAY 5or STOP ∞to select “ON
SCREEN MODE”.
2Press FF 3. Each time you press the button, the setting changes.
ON:
When you press a tape running button (Stop, Play, etc.), the VCR status appears for 5 seconds.
COUNTER:
When you press a tape running button, the VCR operating status appears for 5 seconds.
After 5 seconds, the VCR status disappears except the time counter.
OFF:
The VCR operating status does not appear even if you press a tape running button.
❍3 Finish Setting
Press MENU.
To display the VCR status on the TV screen
manually, press OK/STATUS. The VCR status appears for about 5 seconds.
•If “ON SCREEN MODE” is set to “OFF,” no VCR status appears though you press OK/
STATUS.
Timer Recording
To record while you’re away, follow step 1 — 9 below.
FOR EACH STEP BELOW, YOU NEED TO FINISH WITHIN 60 SECONDS; OTHERWISE, PROGRAMMING WILL HAVE TO BE RESTARTED FROM STEP 1.
1 |
|
|
|
|
|
❍Select Timer Mode |
|
|
|
|
|
Press TIMER. The Timer |
|
|
|
|
|
Recording menu appears. |
|
|
|
| |
| QUICK PROGRAMMING | ||||
| PROGRAM REVIEW |
|
| ||
|
|
|
| ||
| SELECT: | CONFIRM: OK |
| ||
2 | END: TIMER |
|
|
| |
|
|
|
|
| |
❍Select Programme mode |
|
|
| ||
Press PLAY 5or STOP ∞to | ONE TIME PROGRAM | ||||
select “QUICK PROGRAMM- | PROGRAM | 1 |
|
| |
START +/– | – | ||||
| CHANNEL+/– – – | ||||
ING”, then press OK/STATUS. | STOP +/– | – | |||
REC SPEED | SP | ||||
The Quick Programming menu | DATE +/– | – | |||
|
|
|
|
| |
appears. | DAILY: 8 | WEEKLY: 9 |
| ||
CONFIRM: OK | END: TIMER |
| |||
•If you have already set 8 programmes, “ALL PROGRAMS IN USE” appears and goes back to the Timer Recording menu. If this happens, delete unwanted programmes.
❍3 Select Channel
Press VCR CH 5or ∞to enter the TV channel.
•You can also use the 1 REW/CH- and
¡FF/CH+ on the front panel. However, press CH before pressing these buttons. Otherwise, it functions as REW or FF.
•Holding down VCR CH 5or ∞rapidly scans through the channels.
•To record from external line input, press VCR CH 5or ∞until “A/V REAR” appears on the TV screen.
❍4 Select Start Time
Press START + or – (Number button 1 or 4).
•Each time you press the button, the set time changes by
❍5 Select Stop Time
Press STOP + or – (Number button 2 or 5).
•Each time you press the button, the set time changes by
ONE TIME PROGRAM
| PROGRAM | 1 |
|
| CHANNEL+/– 12 | ||
| START +/– | 20:00 |
|
| STOP +/– | 22:00 |
|
| REC SPEED | SP |
|
| DATE +/– | – | |
|
| ||
DAILY: 8 | WEEKLY: 9 | ||
CONFIRM: OK | END: TIMER | ||
12