To check, edit or erase the programmes
1 | Press TIMER. | |
2 | Press PLAY 5or STOP ∞to select | |
| “PROGRAM REVIEW” then press OK/ | |
| STATUS. |
|
3 | Press OK/STATUS repeatedly to view the more | |
| detailed programme information. | |
| • When you press the button for the first time, the | |
| detailed programme information for Programme 1 | |
| appears. By pressing this button repeatedly, you can | |
| review the detailed information of all other | |
| programmes. | |
4 | If you want to change the programme setting | |
| shown on the TV screen, press the following | |
| buttons: |
|
| VCR CH 5/∞ : Changes the channel. | |
| START +/– | :Changes the start time. |
| STOP +/– | :Changes the stop time. |
| SPEED | :Changes the tape speed. |
| DATE | |
●
Tape Duplication
Dubbing from any VCR (or camcorder) to another is simple.
Explanations on this page uses this VCR as the recording VCR.
Refer also the manual supplied with the other VCR (for playback)
1Connect the recording VCR (this VCR) and the playing VCR.
2Connect the recording VCR (this VCR) to the TV.
Playing VCR | Recording VCR (this VCR) |
If you want to erase the programme setting |
shown on the TV screen, press CLEAR. The |
detailed information of the next programme |
appears. |
5 If necessary, press TIMER to exit from the menu |
operations. |
Note:
•This function does not work for OTR (One Touch Recording).
IN 
OUT ANT.IN
AUDIO
RF OUT
VIDEO
Note:
IN 
OUT ANT.IN
AUDIO | To RF OUT |
| RF OUT |
VIDEO |
|
From Audio output to
AUDIO IN
From Video output to
VIDEO IN
How to see the programme list
VR407/55 has single AUDIO IN/OUT jack.
1Programme numbers
2 Preset channel numbers
3 Start time
4 Stop time
5 Start date
“D” stands for “DAILY,” and “W” stands for “WEEKLY.”
1 | 2 | 3 | 4 | 5 | ||||
|
|
|
|
|
|
|
|
|
PR CH | START | STOP | DATE | |||||
1 | 12 | 20:00 | 22:00 | W10/06 | ||||
2 | 25 | 10:00 | 10:45 | MON | ||||
3 | 03 | 15:00 | 15:15 | D16/10 | ||||
4 | 45 | 23:30 | 23:00 | DAILY | ||||
5 |
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
|
8 |
|
|
|
|
|
|
|
|
NEXT: OK | END: TIMER | |||||||
1 Insert a source tape in the playing VCR and a blank tape in the recording VCR.
•If a tape without the record tab is inserted in the playing VCR, playback automatically starts. In this case, press the STOP button.
2 Turn the channel on the TV to your video channel.
•If the programme has worked once for the Daily recording, “DAILY” will be shown instead of the start date.
•If the programme has worked once for the Weekly recording, the day of the week (in this example,
“MON”) will be shown instead of the start date.
Note:
•Even if a power failure occurs, the VCR keeps your timer programs. However, the clock time and other menu settings are lost if it lasts for more than 3 minutes. As a result, when the power is supplied again to this VCR after the power failure, set the clock time and turn off the VCR.
Each timer program you have made will start unless its start time already passes.
3 Press VCR CH 5or ∞, pointing the remote control at this VCR, to select the external line input. Select “AV IN” on the TV screen.
4 Press SPEED, pointing the remote control at this VCR, until the desired tape speed (SP or LP) appears on the screen.
5 Press the PLAY 3 button on the playing VCR.
6 Press REC/OTR ● at this VCR.
Remember: Press the buttons in steps 5 and 6 simultaneously to avoid missing any of the recording.
14