Setting the Clock/Date, Select TV System

SELECT: END: MENU

CONFIRM: OK

CONNECT ANTENNA OR CABLE TO VCR FOR AUTO CH. SET

READY: OK

END: MENU

SYS COUNTRY

B/G W.EUR. ASEAN AUST NZ

D/K CHINA RUS. E.EUR. I HK S.AF. UK

TIME - - : - -

DATE 01/01/01

❍2 Setting the Clock/Date

1Press PLAY 5or STOP ∞ to

set the time. Each time you press the button, the set time changes by one-minute

intervals.	SET:	NEXT: OK
	END: MENU

Press and hold the button to change time by 30- minute intervals.

When the time is correct, press OK/STATUS.

2Press PLAY 5or STOP ∞to set the date. Each time you press the button, the date changes in one-day increments. Press and hold the button to change dates in 15-day increments. When the date is correct, press OK/STATUS.

3Press PLAY 5or STOP ∞to set the year. Each time you press the button, the year changes by

one-year intervals. Press and hold the button to change years rapidly. When the year is correct, press OK/STATUS.

4 Press MENU.

The message on the right will appear.

❍3 Select TV System

1 Press OK/STATUS. The TV

system selecting menu appears on the TV.

2 Press PLAY 5or STOP ∞to select the appropriate TV system of your residential area.

B/G : For West Europe, ASEAN countries, Australia, New Zealand.

D/K : For China, Russia, East Europe.

I: For Hong Kong, South Africa, United Kingdom.

❍4 Start Auto Channel Set

Press OK/STATUS to

programme the receivable	AUTO CH. SET PROCEEDING
programme the receivable	PLEASE WAIT
channels automatically.
The message on the right appears	START	FINISH
on the TV.

When the auto programming is completed

The following message appears

AUTO CH.SET COMPLETED

on the TV, and the lowest channel will be tuned in.

Press VCR CH 5/∞ to change channels on the VCR.

You can also use the 1 REW/CH- and

¡FF/CH+ on the front panel. If there is a cassette in the VCR, press CH before pressing the 1 REW/CH- and ¡FF/CH+, otherwise it functions as REW and FF.

You have now completed the initial setting.

If you stop the Inital Set Up procedure while it is proceeding:

The VCR enters the Initial Set Up mode again the next time you turn on the VCR.

Initial Set Up will not start in the following cases:

• If there is a tape inserted.

• If any one of the Initial Set Up procedures is finished manually.

To Reset the Time or Language

You can always change the time and language setting after you completed the

initial set up.

1	Press MENU.		VCR SET UP
1	Press MENU.		TUNER SET UP
2	Press PLAY 5or STOP ∞to		INITIAL SET UP
2	Press PLAY 5or STOP ∞to
	select “INITIAL SET UP”
	select “INITIAL SET UP”	SELECT:		CONFIRM: OK
	then press OK/STATUS.	END: MENU
	then press OK/STATUS.
3	Press PLAY 5or STOP ∞
	to select “CLOCK” or “		CLOCK
	to select “CLOCK” or “		LANGUAGE	ENGLISH
	LANGUAGE”, depending on
	which setting you want to
	which setting you want to	SELECT:		CHANGE:
	change.	END: MENU
	change.

4To change clock/date:

Repeat step ❍3 (Setting the Clock/Date) of “Initial Set Up” on page 5.

To change language:

Press FF 3repeatedly to choose your preferred language, Chinese or English, then press MENU.