To Reset the Channels, Manual Channel Setting

STORE CHANNEL CONTINUE SEARCH

To Reset the Channels

If you want to re-do the channel setting, follow the procedure below;

1Press MENU.

2	Press PLAY 5or STOP ∞to		VCR SET UP
2	Press PLAY 5or STOP ∞to		TUNER SET UP
	select “TUNER SET UP” then		INITIAL SET UP
	select “TUNER SET UP” then
	press OK/STATUS.
	press OK/STATUS.	SELECT:		CONFIRM: OK
3	Press PLAY5or STOP ∞	END: MENU
3	Press PLAY5or STOP ∞
	to select “AUTO TUNER SET		CHANGING TUNER SET UP
	UP” then press OK/STATUS.		AUTO TUNER SET UP
	UP” then press OK/STATUS.
4	Press PLAY5or STOP ∞
	to select the appropriate TV	SELECT:		CONFIRM: OK
		END: MENU

system [(BG, DK, I)] of your residential area.

5Press OK/STATUS. Auto programming starts. When it ends, programmed channels, frequencies and TV systems are shown on the display.

6Press MENU to exit.

To Delete or Edit Receivable Channels

1Press MENU.

2Press PLAY 5or STOP ∞to select “TUNER SET UP”, then press OK/STATUS.

3Press PLAY 5or STOP ∞to

select “CHANGING TUNER	CH FRQ SYS				CH	FRQ SYS
		01	150	BG	07	229	BG
SET UP”, then press OK/		02	165	BG	08	237	BG
	03		195	BG	09 355		BG
STATUS.	04		205	BG	10	365	BG
	06		221	BG	12	384	BG
	05		213	BG	11	374	BG
The programmed channel	SELECT:∞				DELETE: CLEAR
	CHANGE CH: OK

END: MENU

information list appears.

4Press PLAY 5or STOP ∞ until the desired channel setting flashes.

4.1: TO DELETE UNWANTED CHANNELS: Press CLEAR. Repeat this step until you delete all unwanted channels.

*If you have accidentally deleted a channel,

press REW 2.

4.2: TO EXCHANGE CHANNEL POSITION: Press OK/STATUS once so that the channel number flashes. Using the number button on the remote control, enter the other channel number that you want to exchange with, then press OK/

STATUS.

●

4.3: TO FINE-TUNE CHANNELS

Press OK/STATUS twice so that the frequency indication flashes. Press PLAY5or STOP ∞to fine-tune the station until you get the best possible picture, then press OK/STATUS.

4.4: TO CHANGE THE TV SYSTEM: This is necessary if no sound comes out on the channel.

Press OK/STATUS three times so that the TV system indication flashes. Press PLAY5or STOP ∞to select the approriate TV system (BG, DK, I) so that the sound comes out, then press OK/STATUS.

5Press MENU to exit.

Manual Channel Setting

1Repeat steps 1-3 of “To delete or edit receivable channels” on the left column .

2Press PLAY 5or STOP ∞until a vacant channel in which you want to store a new channel starts flashing, then press OK/STATUS.

3Press PLAY 5or STOP ∞to select the search starting band, then press OK/

STATUS.

VHF L: Starts searching from the VHF L band.

VHF H: Starts searching from the VHF H band.

UHF: Starts searching from the UHF band. Searching starts, and when a station is tuned in, searching stops and the tuned frequency is shown on the TV.

4Press PLAY 5or STOP ∞to select “STORE

CHANNEL”, then press OK/STATUS. The programmed channel

information list appears again with the settings of the newly

tuned channel flashing.

If you do not want to store the	SELECT:	CONFIRM: OK
If you do not want to store the	END: MENU

channel, select “CONTINUE

SEARCH”, then press OK/STATUS so that the search starts again.

5Press MENU to exit.