Philips VRB664AT owner manual Playing, VHS Quasi Play Back Sqpb

Page 30

30 Playing

Read and follow the steps below to play a tape.

1

Turn on the TV and set it to channel 3 or 4, whichever chan- nel to which the CH3/CH4 switch on the back of the VCR is set.

1Turn on the TV.

2Insert a tape in the VCR.

2

Insert a tape in the VCR. The PWR., VCR, and Cassette-Inside lights will appear on the display panel. If the tape’s record tab has been removed, playback will start automatically.

3

If playback does not start automatically, press the PLAY/o button.

4

Press the STOP/p button to stop playback.

5

	POWER
	VCR/TV	SPEED
	REC/OTR
5		PLAY
5	REW	STOP
	MENU	STATUS/EXIT

1 2 3

4 5 6

7 8 9

MUTE 0 ALT.CH

EJECT

MEMORY

PAUSE/STILL

F.FWD

CLEAR

CH.

VOL.

6

3

4

Press the REW(ind)/{ button to rewind the tape.

6

Press the EJECT button to remove the tape.

S-VHS Quasi Play Back (SQPB)

This unit has a SQPB function that allows you to view a tape recorded in S-VHS format. A tape recorded in S-VHS format will play the same as a tape recorded in normal format. This unit detects whether the tape is recorded in S-VHS format or in nor- mal format.

VCR	TV	CBL/DBS
		VCR PLUS+
VAR.SLOW		/ENTER	SLOW
TRACKING		F.ADV	X2 PLAY
SMART	TIME	INDEX REC END	SKIP
PICTURE	TIME	INDEX REC END	SKIP

SEARCH

Helpful Hint

•If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.) Press the VCR button, then press the PLAY/o button.

•Other playback options and fea- tures are on pages 44-57.

•When you play a tape recorded in S-VHS format on this unit, you can not get the high resolution that would be available on an S-VHS VCR. Noise lines (black and white streaks) may appear on the picture.

•If REPEAT PLAY is set to ON, play- back will begin automatically, even when the record tab is intact.

Image 30

Contents VRB664AT Dear Philips product owner For Customer UseFeatures IntroductionDeclaration of Conformity Table of Contents VCR maintenance Putting Batteries in the Remote ControlUsing the Remote Control Removing the Plastic Cover from the Front PanelHookups Without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TVHookups Without a Cable Box/Direct Broadcast System cont’d Plug in the TV and the VCRHookups With a Cable Box/Direct Broadcast System ConnectionsRecording/Viewing Any Channel Hookups With a Cable Box/Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR Press the Menu button. The display shown below will appearAutomatic Channel Setup Press the VCR button Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitManual Clock Setting Do each step within 60 seconds of the previous stepInstructions continue on Setting the Clock cont’d Enter a 0 before a single-digit numberAutomatic Clock Setting Press the VCR button, then press the Menu buttonTime Zone Daylight-Savings Time Language Selection Setting the Remote to Operate a TV Cable BOX Codes Remote Control Buttons Remote Control Buttons cont’d Menu Button REWind/ ButtonRECord/OTR Button Number ButtonsIf you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing VHS Quasi Play Back SqpbRecording Turn on the TV and set it to channel 3 or 4, whichever chanOne-Touch Recording OTR CH12Recording One Channel/Watching Another Timer Recording DailyTimer Recording cont’d Timer Recording cont’d Press the STATUS/EXIT button. Program WAS COMTape Speeds Checking or Cancelling Timer Recordings Setting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Timer Recording with the VCR Plus+ Programming System See page 58 for more hints Auto DBS RecordLink Set the clock. Details are on pagesRerecording Tape Duplication RF coaxial cableRepeat Play Press the PLAY/o button or the STOP/p button to selectPress the F.FWD/B button so that on appears beside Automatic Operation Features Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Playing a Tape at Double SpeedViewing a Still Picture Viewing a Slow Motion PictureDuring tape playback, press the PAUSE/STILL button. a When Child Lock is activated Child LockSmart Picture Time Search Press the VCR button Press the Time Search buttonExample Press the VCR button Press the Index Search buttonRecord End Search Skip SearchReal-Time Counter Memory Blue Background Multi-Channel Television Sound System Understanding On-Screen DisplaysMulti-Channel Television Sound System cont’d Hi-Fi Stereo Sound System Please see additional notes onHelpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel 03 orSpecifications Limited Warranty Video Cassette Recorder or PlayerPayment Amount Limited Warranty cont’dTo obtain a replacement product from Philips Payment, if applicableIndex AutomaticPage Page Page Supplied Accessories