Philips VRZ255 Setting Up the VCR Plus+ Programming System cont’d, 2Examine the lists on

Setting Up the VCR Plus+ Programming System (cont’d) 33

2

Now, compare the channel numbers you have written into the VCR PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do not match. You must tell the VCR Plus+ and Cable/TV channel numbers according to the following steps.

3

Press the VCR button, then press the MENU button.

4

Press the PLAY 8 or STOP 9 button to select INITIAL SET UP, then press the FF :/OK button.

5

Press the PLAY 8 or STOP 9 button to select VCR PLUS+ CH., then press the FF :/OK button.

2Examine the lists on page 32.
3	TV			VCR
	CBL/DBS	–	+	POWER
8	MENU STILL/SLOW			cEJECT
	EXIT/STATUS	REW	PLAY	FF /OK
			:
		;;		::
			L
	TIMER [REC/OTR		STOP	S.SEARCH
4-7	1	2	3
	+	+
	START	STOP	DATE	CH
6-7	4	5	6
	–	–
	DBS	DAILY	WEEKLY
	7	8	9	VOL
	SPEED	0	CLEAR

QUICK PROGRAMMING

VCR/TV 7;;INDEX ::7 AUDIO/MUTE

SET VCR PLUS+ CH.

VCR PLUS+		CABLE/TV
99		– – –
01	– – – –>	– – –
02		– – –
03		– – –

04– – –

SELECT ,9 OR ENTER VCR+ CH. NO. THEN PUSH :/OK

TO END PUSH EXIT

6

While the VCR PLUS+ channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the

Number buttons to select a VCR PLUS+ channel number. The arrow will appear beside the VCR PLUS+ channel. Press the FF :/OK button.

7

While the space for the CABLE/TV channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the Number buttons to enter the CABLE/TV channel number. Press the FF :/OK button.

Repeat steps 6 - 7 until you have entered all the channels on your list.

8

Press the EXIT/STATUS button.