Philips VRZ255 Recording, Press the VCR button, Light will appear on the VCR display panel

Read and follow the steps below to record a television program.

1

Turn on the TV and set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape with its record tab intact (details are on page 5) in the VCR. The power will come on.

3

Press the VCR button.

4

If the VCR light appears on the display panel of the VCR, go to step 5. If the VCR light does not appear, press the VCR/TV button once.

5

Press the SPEED button until the desired tape speed appears on-screen. The VCR will only record in SP or SLP. Details about tape speed are on pages 37 and 50.

6

Use the CH(annel) 8/9 buttons or the Number buttons to select the channel to be recorded.

7

Press the REC(ord)/OTR button to start recording. The \

light will appear on the VCR display panel.

8

To pause the recording (for example, during commer- cials), press the STILL/SLOW button on the remote con- trol. The \M M light will appear on the display panel.

To resume recording, press the STILL/SLOW button again. The \ light will appear on the display panel.

9

Press the STOP 9 button to stop recording. The \ light will disappear from the display panel.

Recording 29

1 Turn on the TV.

2 Insert a tape.

	TV				VCR		3
8	CBL/DBS		–	+	POWER
	MENU	STILL/SLOW			cEJECT
			REW	PLAY	FF	/OK	9
7	EXIT/STATUS			:
			;;		::
				L
	TIMER [REC/OTR			STOP	S.SEARCH
	1	+	2	3			6
			+
	START		STOP	DATE	CH
	4		5	6
		–	–
	DBS		DAILY	WEEKLY
	7		8	9
					VOL
	SPEED		0	CLEAR
4	QUICK PROGRAMMING
	VCR/TV		7;;INDEX ::7		AUDIO/MUTE
5

Helpful Hints

•If the REC(ord)/OTR button is pressed while a tape without a record tab is in the VCR, PROTECT-

ED CASSETTE CANNOT RECORD will appear on-screen briefly. The VCR will eject the tape.

•The VCR records in a preset volume.

•If the end of the tape is reached while recording, the VCR will stop recording, rewind the tape, then stop. Details are on page 49.