Hookups With a Cable Box/Direct Broadcast System (cont’d) 9
With this connection:
•You may watch one channel while recording another.
•You may not record scrambled channels.
1 VCR
IN | OUT | ANT.IN | 2 |
| R |
| |
AUDIO | L |
| |
VIDEO |
| RF OUT |
|
|
|
| |
CH3 CH4 |
|
|
|
Cable Box/DBS
IN
OUT
75Ω |
|
ANT | / |
CABLE |
Cable signal
RF coaxial cable
RF coaxial cable
3 TV’s
ANTENNA
IN jack
Connections
1
Connect a Cable signal to the VCR’s ANT(enna) IN jack.
2
Use an RF coaxial cable (supplied) to connect the RF OUT jack on the VCR to the IN jack on the Cable Box/DBS.
3
Use a second RF coaxial cable to connect the OUT jack on the Cable Box/DBS to the TV’s ANTENNA IN jack.
Recording One Channel/Watching Another
1
Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 switch. Then, with the VCR in VCR position (the VCR light will appear on the display panel), use the CH(annel) 8/9 buttons to select the channel you want to record at the VCR. Start the recording.
2
Press the VCR/TV button once to put the VCR in TV position. (The VCR light will disappear.)
3
Set the TV to the Cable Box/DBS output channel (03 or 04).
4
Select the channel you want to watch at the Cable Box/DBS.
Helpful Hint
•When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the VCR. Set the TV to the Cable Box/DBS output channel (03 or 04).