Philips VRZ222AT owner manual Daylight-Saving Time

Page 16

VRZ222 layout 4/8/99 10:19 PM Page 16

16 Daylight-Saving Time

You may program the VCR so its clock will automatically move forward one hour in April and turn back one hour in October. Daylight-Saving Time is set to ON when you receive your VCR. Turn Daylight-Saving Time ON or OFF by following the steps below. Before you begin:

●Make sure the clock is set.

1

Press the VCR button.

2

Press the MENU button.

SELECT op CHOOSE B

→PROGRAM VCR SET UP TUNER SET UP SET CLOCK

TO END PUSH EXIT

3

Press the PLAY/o button or the STOP/p button to select SET CLOCK, then press the F.FWD/B button.

SET CLOCK

SET CLOCK

→DAYLIGHT SVG TIME [ON]

SELECT op CHOOSE B

TO END PUSH EXIT

4

Press the PLAY/o button or the STOP/p button to select DAYLIGHT SVG TIME. Then, press the F.FWD/B button so that OFF (or ON) appears beside DAYLIGHT SVG TIME.

5

Press the STATUS/EXIT button.

2

5

1 3-4

POWER

VCR

TV

		VCR/TV
1	2	3
4	5	6
		CHANNEL
7	8	9
VCR PLUS+

0+100

SPEED	MUTE	VOLUME
SPEED

	PLAY
REW		F.FWD
	STOP
REC/OTR	MEMORY	PAUSE/STILL
MENU	STATUS/EXIT CLEAR	EJECT

Image 16

Contents VRZ222AT Dear Philips Magnavox product owner For Customer UseSafety Precautions FeaturesIntroduction Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR ANT Audio OUTConnections Hookups With a Cable Box / Direct Broadcast SystemRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Press the VCR button Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitSetting the Clock Enter a 0 before a single digit num- berDaylight-Saving Time Language Selection Remote Control Buttons Speed ButtonRemote Control Buttons cont’d On-Screen Status Displays Status Display example onlyIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing Recording VCR light does not appear, press the VCR/TV button onceRecording One Channel/Watching Another One-Touch Recording Timer Recording DailyTimer Recording cont’d Instructions continue onPress the STATUS/EXIT button. Program WAS COM Tape SpeedsChecking or Cancelling Timer Recordings See page 42 for more hintsSetting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Do each step within 60 seconds of the previous step Press the VCR PLUS+ buttonTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication AntennaRepeat Play Press the F.FWD/B button so that on appears besideReal-Time Counter Memory Super High Speed Searching LP/SLP Forward and Reverse Searching SP/LP/SLPViewing a Still Picture Automatic Operation Features Specifications Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel 03 orLimited Warranty Video Cassette RecorderIndex AutomaticVRZ222 layout 4/8/99 1019 PM Supplied Accessories