VRZ222 layout 4/8/99 10:19 PM Page 31
Timer Recording (cont’d) 31
Checking or Cancelling Timer Recordings
12-3
With the VCR on and in VCR position (the VCR light will appear on the display panel), press the VCR button, then press the
MENU button.
2 |
|
Press the PLAY/o button or the STOP/p button to select |
|
PROGRAM, then press the F.FWD/B button. |
|
3 |
|
Press the PLAY/o button or the STOP/p button to select |
|
PROGRAM REVIEW, then press the F.FWD/B button. |
|
The timer recording information for the program in the lowest |
|
numbered slot will appear | 1 |
set, nothing will happen when you press the F.FWD/B button. | |
4 |
|
Press the F.FWD/B button repeatedly to review all pro- grammed timer recordings. If you don’t press the F.FWD/B button within 10 seconds, the VCR will automatically display infor- mation about the next programmed timer recording. This will continue until all timer recordings have been displayed. Then the menu will disappear.
POWER | VCR | TV |
| 2 | 3 | VCR/TV |
1 |
| ||
4 | 5 | 6 |
|
|
|
| CHANNEL |
7 | 8 | 9 |
|
VCR PLUS+ | 0 |
|
|
| +100 |
| |
SPEED |
| MUTE | VOLUME |
| PLAY |
| |
REW |
| F.FWD | |
| STOP |
| |
REC/OTR | MEMORY |
| PAUSE/STILL |
MENU | STATUS/EXIT | CLEAR | EJECT |
4
5
5
To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.
6
Repeat steps 1 - 4 to make sure you have cleared the cor- rect timer recording.
Helpful Hints
•CLASH may flash
•If the preset time for a timer recording comes up during a One- Touch Recording, the OTR has pri- ority.
•To stop a started timer recording, press the STOP/EJECT button on the VCR.
•If the power fails for more than one minute, programmed timer record- ings will be lost. Reset the clock before resetting the timer record- ings.