Philips VRZ222AT owner manual Recording One Channel/Watching Another

Page 26

VRZ222 layout 4/8/99 10:19 PM Page 26

26 Recording One Channel/Watching Another

1

Start a recording. (See page 25.)

2

Press the VCR button.

3

Press the VCR/TV button to put the VCR in TV position. The VCR light will disappear from the VCR’s display panel.

4

Choose the channel you want to watch at the TV.

5

To return to the channel being recorded, select channel	1
03 or 04 at the TV (whichever channel the CH3/CH4 switch on

the back of the VCR is set to).

2&6

POWER

VCR

TV

		VCR/TV
1	2	3
4	5	6
		CHANNEL
7	8	9
VCR PLUS+

0+100

SPEED

MUTE

VOLUME

	PLAY
REW		F.FWD
	STOP
REC/OTR	MEMORY	PAUSE/STILL
MENU	STATUS/EXIT CLEAR	EJECT

3

7

8

6

Press the VCR button.

7

Press the VCR/TV button to put the VCR in VCR posi- tion. The VCR light will appear on the display panel. The channel being recorded will appear on-screen.

8

Press the STOP/p button to stop the recording.

4

5

Select the channel you want to watch at the TV.

Select channel 03 or 04 at the TV.

Helpful Hints

•If you use a Cable Box or Direct Broadcast System hookup, you may not be able to watch one channel while recording another. See pages eight-nine for details.

Image 26

Contents VRZ222AT Dear Philips Magnavox product owner For Customer UseIntroduction FeaturesSafety Precautions Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR ANT Audio OUTRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast SystemConnections Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Press the VCR button Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitSetting the Clock Enter a 0 before a single digit num- berDaylight-Saving Time Language Selection Remote Control Buttons Speed ButtonRemote Control Buttons cont’d If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing Recording VCR light does not appear, press the VCR/TV button onceRecording One Channel/Watching Another One-Touch Recording Timer Recording DailyTimer Recording cont’d Instructions continue onPress the STATUS/EXIT button. Program WAS COM Tape SpeedsChecking or Cancelling Timer Recordings See page 42 for more hintsSetting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Do each step within 60 seconds of the previous step Press the VCR PLUS+ buttonTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication AntennaRepeat Play Press the F.FWD/B button so that on appears besideReal-Time Counter Memory Viewing a Still Picture Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Automatic Operation Features Specifications Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel 03 orLimited Warranty Video Cassette RecorderIndex AutomaticVRZ222 layout 4/8/99 1019 PM Supplied Accessories