Philips VRZ222AT owner manual Playing

Page 24

VRZ222 layout 4/8/99 10:19 PM Page 24

24 Playing

Read and follow the steps below to play a tape.

1

Turn on the TV and set it to channel 03 or 04, whichever the CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape in the VCR. The PWR., VCR, and Cassette-Inside lights will appear on the display panel. If the tape’s record tab has been removed, playback will start automatically.

3

1Turn on the TV.

2Insert a tape in the VCR.

POWER

VCR

TV

		VCR/TV
1	2	3
4	5	6
		CHANNEL

7 8 9

If playback does not start automatically, press the PLAY/o button.

4

Press the STOP/p button on the remote control or the

STOP/EJECT button on the VCR once to stop playback.

5

Press the REW(ind)/{ button to rewind the tape.

6

When the tape stops, press the EJECT button on the remote control or the STOP/EJECT button on the VCR to remove the tape.

3

5

4

VCR PLUS+	0
	0	+100
SPEED		MUTE
	PLAY
REW
	STOP
REC/OTR	MEMORY
MENU	STATUS/EXIT	CLEAR

VOLUME

F.FWD

PAUSE/STILL

EJECT

6

Helpful Hints

•If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button.) Press the VCR button, then press the PLAY/o button.

•Other playback options and fea- tures are on pages 37 - 40.

Image 24

Contents VRZ222AT Dear Philips Magnavox product owner For Customer UseFeatures Safety PrecautionsIntroduction Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR ANT Audio OUTHookups With a Cable Box / Direct Broadcast System ConnectionsRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Press the VCR button Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitSetting the Clock Enter a 0 before a single digit num- berDaylight-Saving Time Language Selection Remote Control Buttons Speed ButtonRemote Control Buttons cont’d On-Screen Status Displays Status Display example onlyIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing Recording VCR light does not appear, press the VCR/TV button onceRecording One Channel/Watching Another One-Touch Recording Timer Recording DailyTimer Recording cont’d Instructions continue onPress the STATUS/EXIT button. Program WAS COM Tape SpeedsChecking or Cancelling Timer Recordings See page 42 for more hintsSetting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Do each step within 60 seconds of the previous step Press the VCR PLUS+ buttonTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication AntennaRepeat Play Press the F.FWD/B button so that on appears besideReal-Time Counter Memory Forward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPViewing a Still Picture Automatic Operation Features Specifications Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel 03 orLimited Warranty Video Cassette RecorderIndex AutomaticVRZ222 layout 4/8/99 1019 PM Supplied Accessories