Philips VRZ222AT owner manual Rerecording Tape Duplication, Antenna

Page 36

VRZ222 layout 4/8/99 10:19 PM Page 36

36Rerecording (Tape Duplication)

1.Audio cable from AUDIO OUT Jack of VCR 1 to AUDIO IN Jack of VCR 2

VCR 1

Playing VCR

ANT

IN

AUDIO
OUT	IN		OUT
VIDEO		CH3	CH4
VIDEO

VCR 2 - Recording VCR

			ANT
			IN
AUDIO
OUT	IN		OUT
VIDEO		CH3	CH4
VIDEO

2.Video cable from VIDEO OUT Jack of VCR 1 to VIDEO IN Jack of VCR 2

●Audio and video cables are not supplied.

3.RF coaxial cable from VCR’s OUT Jack to TV’s

ANTENNA IN

Jack

1

Make the connections shown above.

2

VCR 1 will play your tape. Put a prerecorded tape in VCR 1.

3

VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.)

4

Turn on the TV and set it to channel 03 or 04, whichever channel the CH3/CH4 switch on VCR 2 is set to.

5

Point the remote control at VCR 2. Press Number but- tons 0, 0 to select Line Input. A/V IN will appear on-screen.

6

Use the SPEED button to select SP, LP, or SLP at VCR 2.

7

Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time.

To stop recording, press the STOP/EJECT button on VCR 1, then press the STOP/EJECT button on VCR 2.

Helpful Hints

•Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

•These instructions show you how to copy tapes using two VCRs like yours. Different VCRs may operate differently.

Image 36

Contents VRZ222AT Dear Philips Magnavox product owner For Customer UseFeatures Safety PrecautionsIntroduction Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR ANT Audio OUTHookups With a Cable Box / Direct Broadcast System ConnectionsRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Press the VCR button Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitSetting the Clock Enter a 0 before a single digit num- berDaylight-Saving Time Language Selection Remote Control Buttons Speed ButtonRemote Control Buttons cont’d On-Screen Status Displays Status Display example onlyIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing Recording VCR light does not appear, press the VCR/TV button onceRecording One Channel/Watching Another One-Touch Recording Timer Recording DailyTimer Recording cont’d Instructions continue onPress the STATUS/EXIT button. Program WAS COM Tape SpeedsChecking or Cancelling Timer Recordings See page 42 for more hintsSetting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Do each step within 60 seconds of the previous step Press the VCR PLUS+ buttonTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication AntennaRepeat Play Press the F.FWD/B button so that on appears besideReal-Time Counter Memory Forward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPViewing a Still Picture Automatic Operation Features Specifications Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel 03 orLimited Warranty Video Cassette RecorderIndex AutomaticVRZ222 layout 4/8/99 1019 PM Supplied Accessories