Philips VRX242AT On-Screen Status Displays, Status Display example only, If you select Status OFF

Page 20

VRX240comb 4/8/99 8:45 PM Page 20

20 On-Screen Status Displays

A status display will appear when you press the STATUS/EXIT button or certain function buttons. The contents of the status dis- play will vary. To choose the status display mode, follow the steps below.

If you select STATUS ON, then select COUNTER ONLY ON:

Whenever you press the STOP/p button or the PLAY/o but- ton, the status display will appear for five seconds. After five seconds, only the counter will remain on-screen. You must

press the STATUS/EXIT button to remove it.

If you select STATUS ON, then select COUNTER ONLY OFF:

Whenever you press the STOP/p button or the PLAY/o but- ton, the status display will appear for five seconds.

If you select STATUS OFF:

The status display will not appear when you press function but- tons. You must press the STATUS/EXIT button to see the sta- tus display.

1

Press the MENU button.

2

Press the PLAY/o button or the STOP/p button to select VCR SET UP, then press the F.FWD/B button.

3

Press the PLAY/o button or the STOP/p button to select ON SCREEN MODE, then press the F.FWD/B button.

4

Press the PLAY/o button or the STOP/p button to select STATUS, then press the F.FWD/B button so that OFF (or ON) appears beside STATUS.

SELECT op CHOOSE B

STATUS

[ON]

COUNTER ONLY

[OFF]

TO END PUSH EXIT

5

If you set STATUS to OFF, go to step 6. If you set STA- TUS to ON, press the PLAY/o button or the STOP/p button to select COUNTER ONLY, then press the F.FWD/B button so that OFF (or ON) appears beside it.

6

Press the STATUS/EXIT button.

Status Display (example only)

Button

Pressed

 

Time

 

 

 

 

 

 

 

 

 

 

 

STOP

 

12:00 AM

 

 

 

 

CH10

SLP

M 1:23:45

 

 

 

 

 

 

 

 

 

 

 

Channel

Tape

Counter

Speed

and

 

 

 

Counter

 

 

 

Memory

Helpful Hints

If the channel you select has no broadcast, the screen will become solid blue.

You may not access a status display when viewing a still picture, during slow motion playback, or when the F.FWD/B or REWIND/s button is pressed during playback.

Image 20
Contents VRX240AT Dear Philips Magnavox product owner For Customer UseIntroduction FeaturesSafety Precautions Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR ANT Audio OUTRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast SystemConnections Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR Automatic Channel Setup Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitSetting the Clock Daylight-Saving Time Language Selection Menu Button Remote Control ButtonsPower Button FWDFast Forward/B Button Remote Control Buttons cont’dEject Button On-Screen Status Displays Status Display example onlyIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing 1Turn on the TV 2Insert a tape in the VCRRecording VCR light does not appear, press the VCR/TV button onceRemote control to select channel 03 or 04 at the TV Recording One Channel/Watching AnotherTo return to the channel being recorded, use the TV Press the VCR/TV button to put the VCR in VCR posiOne-Touch Recording Timer Recording DailyTimer Recording cont’d Instructions continue onPress the STATUS/EXIT button. Program WAS COM Tape SpeedsChecking or Cancelling Timer Recordings Press the PLAY/o button or the STOP/p button to selectProgram REVIEW, then press the F.FWD/B button See page 42 for more hintsSetting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication AntennaRepeat Play Press the F.FWD/B button so that on appears besideTime Search Press the Time Search buttonReal-Time Counter Memory Special Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel 03 orSpecifications Limited Warranty Video Cassette RecorderIndex AutomaticSupplied Accessories