Philips VRX242AT owner manual Checking or Cancelling Timer Recordings, See page 42 for more hints

Page 31

VRX240comb 4/8/99 8:45 PM Page 31

Timer Recording (cont’d) 31

Checking or Cancelling Timer Recordings

1

With the VCR on and in VCR position (the VCR light will appear on the display panel), press the MENU button.

2

POWER

VCR/TV

EJECT

1 2 3

Press the PLAY/o button or the STOP/p button to select

4

5

6

 

 

 

 

 

PROGRAM, then press the F.FWD/B button.

7

8

9

CHANNEL

3

 

VCR PLUS+

0

+100

 

 

 

 

 

1

SPEED

TIME SEARCH MEMORY

Press the PLAY/o button or the STOP/p button to select

MENU

STATUS/EXIT

CLEAR

SLOW

PROGRAM REVIEW, then press the F.FWD/B button.

 

 

 

 

The timer recording information for the program in the lowest

REWIND

/PLAY

F.FWD

numbered slot will appear on-screen. If no timer recordings are

 

REC/OTR

/STOP

PAUSE/STILL

set, nothing will happen when you press the F.FWD/B button.

 

 

 

 

 

5

4

4

Press the F.FWD/B button repeatedly to review all pro- grammed timer recordings. If you don’t press the F.FWD/B button within 10 seconds, the VCR will automatically display infor- mation about the next programmed timer recording. This will continue until all timer recordings have been displayed. Then the menu will disappear.

5

To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.

6

Repeat steps 1 - 4 to make sure you have cleared the cor- rect timer recording.

2-3

Helpful Hints

•CLASH may flash on-screen when you finish setting a timer recording. This means that the timer recording you just programmed and another timer recording overlap. The current timer recording will not take place. You may choose to cancel the over- lapping timer recording.

•If the preset time for a timer recording comes up during a One- Touch Recording, the OTR has pri- ority.

•To stop a started timer recording, press the STOP/EJECT button on the VCR.

•If the power fails for more than one minute, programmed timer record- ings will be lost. Reset the clock before resetting the timer record- ings.

See page 42 for more hints.

Page 30 Page 32
Image 31
Page 30 Page 32
Contents VRX240AT For Customer Use Dear Philips Magnavox product ownerSafety Precautions FeaturesIntroduction Table of Contents Before Using Your VCR Disconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemANT Audio OUT Plug in the TV and the VCRConnections Hookups With a Cable Box / Direct Broadcast SystemRecording/Viewing Any Channel Recording One Channel/Watching Another Hookups With a Cable Box / Direct Broadcast System cont’dHookups With a Stereo TV Turning on Your VCR Press the Menu button Automatic Channel SetupAdding/Deleting Channels Automatic Channel Setup cont’dPress the STATUS/EXIT button once or twice to exit Reviewing Memorized ChannelsSetting the Clock Daylight-Saving Time Language Selection Power Button Remote Control ButtonsMenu Button Eject Button Remote Control Buttons cont’dFWDFast Forward/B Button If you select Status ON, then select Counter only OFF On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only onVCR Display Panel Front Panel Rear Panel 1Turn on the TV 2Insert a tape in the VCR PlayingVCR light does not appear, press the VCR/TV button once RecordingPress the VCR/TV button to put the VCR in VCR posi Remote control to select channel 03 or 04 at the TVRecording One Channel/Watching Another To return to the channel being recorded, use the TVOne-Touch Recording Daily Timer RecordingInstructions continue on Timer Recording cont’dTape Speeds Press the STATUS/EXIT button. Program WAS COMSee page 42 for more hints Checking or Cancelling Timer RecordingsPress the PLAY/o button or the STOP/p button to select Program REVIEW, then press the F.FWD/B buttonChannels Setting Up the VCR Plus+ Programming SystemSetting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Timer Recording With the VCR Plus+ Programming System cont’d Antenna Rerecording Tape DuplicationPress the F.FWD/B button so that on appears beside Repeat PlayPress the Time Search button Time SearchReal-Time Counter Memory Viewing a Still Picture Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPAutomatic Operation Features Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel 03 or GlossarySpecifications Video Cassette Recorder Limited WarrantyAutomatic IndexSupplied Accessories
Top Page Image Contents