Philips VRX242AT owner manual Setting Up the VCR Plus+ Programming System, Channels

Page 32

VRX240comb 4/8/99 8:45 PM Page 32

32 Setting Up the VCR Plus+ Programming System

1

First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR Plus+ programming system to work properly.

Since the channel numbers of the stations you receive may not be the same as the station numbers, and since channel numbers differ from area to area, you must program the VCR with your local channel infor- mation. To fill in the boxes, you will need 1) a cable channel list, if applicable (you can request one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in your TV guide or the TV listings of your local newspaper.

NOTE: If you are using a Cable Box/DBS, the Cable/TV channel must be 03 or 04 (the Cable Box/DBS output channel) for every VCR Plus+ channel.

Station

Channels

VCR PLUS+ CH. CABLE/TV CH.

Station

Channels

VCR PLUS+ CH. CABLE/TV CH.

Call Letters

Call Letters

Image 32

Contents VRX240AT Dear Philips Magnavox product owner For Customer UseIntroduction FeaturesSafety Precautions Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR ANT Audio OUTRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast SystemConnections Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR Automatic Channel Setup Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitSetting the Clock Daylight-Saving Time Language Selection Menu Button Remote Control ButtonsPower Button FWDFast Forward/B Button Remote Control Buttons cont’dEject Button On-Screen Status Displays Status Display example onlyIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing 1Turn on the TV 2Insert a tape in the VCRRecording VCR light does not appear, press the VCR/TV button onceRemote control to select channel 03 or 04 at the TV Recording One Channel/Watching AnotherTo return to the channel being recorded, use the TV Press the VCR/TV button to put the VCR in VCR posiOne-Touch Recording Timer Recording DailyTimer Recording cont’d Instructions continue onPress the STATUS/EXIT button. Program WAS COM Tape SpeedsChecking or Cancelling Timer Recordings Press the PLAY/o button or the STOP/p button to selectProgram REVIEW, then press the F.FWD/B button See page 42 for more hintsSetting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication AntennaRepeat Play Press the F.FWD/B button so that on appears besideTime Search Press the Time Search buttonReal-Time Counter Memory Special Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel 03 orSpecifications Limited Warranty Video Cassette RecorderIndex AutomaticSupplied Accessories