Philips VRX242AT owner manual Remote Control Buttons, Power Button, Menu Button

VRX240comb 4/8/99 8:45 PM Page 18

18 Remote Control Buttons

POWER Button

Press to turn the VCR on or off.

Number Buttons Use to select channels and to program VCR functions (such as the clock).

Channels 1 - 9 ● To select, press 0, then the channel number you want. For example, to select channel 7, press 0, 7.

Channels 100 and above ● To select, press the +100 button, then press the last two digits of the channel you want. For example, to select channel 117, press the +100 button, 1, 7.

VCR PLUS+ Button Press to set a timer recording with the VCR Plus+ programming system. Details are on pages 32 - 35.

SPEED Button Press to select the recording speed (SP, LP, or SLP). Details are on pages 30 and 44.

TIME SEARCH Button Press to fast forward or rewind the tape a specific length of time.

Details are on page 38.

MENU Button

Press to bring up the main menu display.

REWIND/{ Button When tape playback is stopped, press to rewind the tape at high speed. During playback, press to rewind the tape while the picture stays on-screen. Details are on page 40.

Press to return to a previous on-screen menu.

REC(ord)/OTR Button Press once to start a recording. Details are on page 25.

Or, press repeatedly to start a One-Touch Recording. Details are on page 27.

STATUS/EXIT Button Press to access or remove the on-screen status display.

Details are on page 20. Press to exit on-screen menus.

PLAY/o Button Press to play a tape; press to release Slow, Search, or Still mode and return to normal playback. Details are on page 40.

Press to select an item in the on-screen menu.

MEMORY Button Press to memorize a tape position at which the real-time counter was set to 0:00:00. Details are on page 39.

POWER		VCR/TV	EJECT
1	2	3
4	5	6
7	8	9	CHANNEL
VCR PLUS+	0	+100
SPEED		TIME SEARCH	MEMORY

MENU	STATUS/EXIT	CLEAR	SLOW
REWIND	/PLAY		F.FWD
REC/OTR	/STOP		PAUSE/STILL