Philips VRX242AT owner manual Real-Time Counter Memory

VRX240comb 4/8/99 8:45 PM Page 39

Real-Time Counter Memory 39

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.

1

Play, fast forward, or rewind a tape to the location that you would like to refer to later. Press the STOP/p button to stop the tape.

2

Press the STATUS/EXIT button to see the status display.

STOP	1:08PM
	CH10
SLP	1 : 23 : 45	2
3		5
While the status display is on-screen, press the CLEAR		1
button to reset the real-time counter to zero.
STOP	1:08 PM
	CH10
SLP	0 : 00 : 00

POWER		VCR/TV	EJECT
1	2	3
4	5	6
7	8	9	CHANNEL
VCR PLUS+	0	+100
SPEED	TIME SEARCH		MEMORY
MENU	STATUS/EXIT	CLEAR	SLOW
REWIND	/PLAY		F.FWD

REC/OTR /STOP PAUSE/STILL

4

3

4

While the real-time counter is on-screen, press the MEM- ORY button so that M appears beside the counter.

STOP	1:08 PM
	CH10

SLP M 0 : 00 : 00

5

To go to a tape location where the real-time counter was reset to zero, press the REWIND/{ button or the F.FWD/B button when playback is stopped.

When the tape reaches the point at which the counter was set to zero, the tape will stop.

Press the PLAY/o button to watch the tape.

Helpful Hints

•The MEMORY button does not function if REPEAT PLAY is set to ON. Details are on page 37.

•To erase a real-time counter memo- ry, press the MEMORY button until the M disappears from the screen.

•You may only set the real-time counter to zero at one location at a time. If you try to set the real-time counter to zero at a second loca- tion, the previous real-time counter to zero setting will be erased.