Philips VRX242AT owner manual Rerecording Tape Duplication, Antenna

Page 36

VRX240comb 4/8/99 8:45 PM Page 36

36 Rerecording (Tape Duplication)

1.Audio cable from AUDIO OUT Jack of VCR 1 to AUDIO IN Jack of VCR 2

VCR 1

Playing VCR

			ANT
			IN
AUDIO
OUT	IN		OUT
VIDEO		CH3	CH4
VIDEO

VCR 2 - Recording VCR
		ANT
		IN
AUDIO
OUT IN		OUT
VIDEO	CH3	CH4
VIDEO

2.Video cable from VIDEO OUT Jack of VCR 1 to VIDEO IN Jack of VCR 2

●Audio and Video cables are not supplied.

3.RF coaxial cable from VCR’s OUT Jack to TV’s

ANTENNA IN

Jack

1

Make the connections shown above.

2

VCR 1 will play your tape. Put a prerecorded tape in VCR 1.

3

VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.)

4

Turn on the TV and set it to channel 03 or 04, whichever channel the CH3/CH4 switch on VCR 2 is set to.

5

Point the remote control at VCR 2. Press Number but- tons 0, 0 to select Line Input. A/V IN will appear on- screen.

6

Use the SPEED button to select SP, LP, or SLP at VCR 2.

7

Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time.

To stop recording, press the STOP/EJECT button on VCR 1, then press the STOP/EJECT button on VCR 2.

Helpful Hints

•Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

•These instructions show you how to copy tapes using two VCRs like yours. Different VCRs may operate differently.

Image 36

Contents VRX240AT Dear Philips Magnavox product owner For Customer UseFeatures Safety PrecautionsIntroduction Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR ANT Audio OUTHookups With a Cable Box / Direct Broadcast System ConnectionsRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR Automatic Channel Setup Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitSetting the Clock Daylight-Saving Time Language Selection Remote Control Buttons Power ButtonMenu Button Remote Control Buttons cont’d Eject ButtonFWDFast Forward/B Button On-Screen Status Displays Status Display example onlyIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing 1Turn on the TV 2Insert a tape in the VCRRecording VCR light does not appear, press the VCR/TV button onceRemote control to select channel 03 or 04 at the TV Recording One Channel/Watching AnotherTo return to the channel being recorded, use the TV Press the VCR/TV button to put the VCR in VCR posiOne-Touch Recording Timer Recording DailyTimer Recording cont’d Instructions continue onPress the STATUS/EXIT button. Program WAS COM Tape SpeedsChecking or Cancelling Timer Recordings Press the PLAY/o button or the STOP/p button to selectProgram REVIEW, then press the F.FWD/B button See page 42 for more hintsSetting Up the VCR Plus+ Programming System Channels Setting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication AntennaRepeat Play Press the F.FWD/B button so that on appears besideTime Search Press the Time Search buttonReal-Time Counter Memory Special Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel 03 orSpecifications Limited Warranty Video Cassette RecorderIndex AutomaticSupplied Accessories