Philips VR400BMG owner manual Specifications

Page 45

Specifications 45

Video Heads

Four heads

Video Signal

EIA standards; NTSC color

Antenna

VHF/UHF – 75 ohm external antenna terminal

VHF Output Signal

Channel 3 or 4 (switchable) 75 ohms unbalanced

Power Requirement

120V AC; 60Hz

Power Consumption

12W

Operating Temperature

41°F (5°C) to 104°F (40°C)

Relative Humidity

10% to 80%

Weight

5.3 lbs. (2.4 kg.)

Dimensions

14-3/16” (W) x 3-5/8” (H) x 8-3/4” (D) (360 mm x 92mm x 223mm)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

1-125

NOTE: Designs and specifications are subject to change without notice.

Image 45

Contents VCR For Customer Use Warranty VerificationSafety Precautions FeaturesIntroduction Declaration of ConformityTable of Contents Putting Batteries in the Remote Control Before Using Your VCRUsing the Remote Control VCR maintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemCH3 CH4 Plug in the AC power cords of the TV and the VCRCable Signal ConnectionsRecording/Viewing Any Channel Recording One Channel/Watching Another SignalCable Box/DBS CableHookups With a Stereo TV Below will appear Turning on Your VCRPress the Menu button until the main menu appears Automatic Channel SetupAdding/Deleting Channels Automatic Channel Setup cont’dFollow the steps below to set your VCR’s clock. Make sure Setting the ClockYour selection will flash on the screen in the AM/PM space Setting the Clock cont’dLanguage Selection Press the Counter RESET/EXIT button to exitOFF mode Press the Display button once Count mode Press the Display button once Clock modeOn-Screen Status Displays Remote Control Buttons Eject Button Counter RESET/EXIT ButtonTime Search Button Index Search ButtonVCR Display Panel Remote Sensor FWD Fast Forward Button Speed Button Power ButtonVCR/TV Button Play ButtonRear Panel AC Power CordVideo OUT Jack Video in JackPlaying VHS Quasi Play Back SqpbRead and follow the steps below to play a tape 1Turn on the TV Insert a tape RecordingOne-Touch Recording Starting an OTRStopping an OTR Channels are set up Clock is set Timer RecordingTimer Recording cont’d Repeat the procedure in to set the recording’s end timeEnter the recording’s start time Start Time END Time Channel REC Speed SLP Cancelling a Timer Recording Timer Recording cont’d42&5 Correcting a Timer RecordingSet the program to be recorded On the satellite tuner Auto Satellite Link Using a Satellite TunerRecording One Channel/Watching Another Press the VCR/TV button on the VCR remote control toTo return to the channel being recorded, use the TV Put the VCR in VCR position. The VCR/TV light will appearAntenna Rerecording Tape DuplicationRepeat Play Forward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still PicturePicture Select Press the Play button or the Stop button repeatedly toSelect Picture SELECT. Then, press the F.FWD button Press the Play button to watch the tape Real-Time Counter MemoryPress the Index Search button Index SearchPress the Time Search button Time SearchQuick Find Press the QUICK-FIND buttonTo resume normal tape playback, press the Play button Automatic Playback Features Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel Channel 3 or GlossarySpecifications Renewed Index Supplied Accessories