Philips VR400BMG owner manual Auto Satellite Link Using a Satellite Tuner

Page 31

Auto Satellite Link Using a Satellite Tuner 31

If you connect your VCR to a satellite tuner that has the Electronic Program Guide, the VCR will turn itself on, record, then turn itself off. First, read the owner’s manual of your satellite tuner; then, follow the steps below. Before you begin:

Use audio and video cables to connect the VCR’s AUDIO/VIDEO IN jacks to the satellite tuner’s AUDIO/VIDEO OUT jacks.

Press the SPEED button to select the desired recording tape speed (SP or SLP).

Set the clock. Details are on pages 14-15.

Put a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).

1

Set the program to be recorded on the satellite tuner. See

your satellite tuner owner’s manual for details.

2

Press the MENU button until the main menu appears.

3

Press the PLAY button or the STOP button to select AUTO SATELLITE LINK. Then, press the F.FWD button. The current time appears on the screen.

If you want the VCR to begin recording immediately, press the F.FWD button again, then go to step 6.

If you want to tell the VCR the time to start recording, go to step 4.

Set the program to be recorded

1 on the satellite tuner.

POWER

VCR/TV

EJECT

1 2 3

4 5 6

7 8 9 CHANNEL

 

SPEED

0

+100

 

 

2

SLOW

QUICK-

SEARCH

 

FIND

TIME

INDEX

 

 

 

 

 

MENU

DISPLAY

EXIT

COUNTER

 

 

 

RESET

MEMORY

3-6

REWIND

/ PLAY

F.FWD

 

RECORD

 

/ STOP

PAUSE/STILL

4

Press the PLAY button or the STOP button until the desired hour (AM or PM) appears. Then, press the F.FWD button.

AUTO SATELLITE LINK

01:00 PM

5

Press the PLAY button or the STOP button until the desired minute appears.

AUTO SATELLITE LINK

01:30 PM

6

Press the F.FWD button. [ON] will appear briefly beside AUTO SATELLITE LINK. Then, the VCR will turn itself off and the TIMER light will appear on the display panel.

Helpful Hints

To stop an Auto Satellite Link recording that is in progress, press the STOP/EJECT button on the VCR.

If a program has copy guard pro- tection, it may not record clearly.

When you use this feature, the first few seconds of a program may not be recorded.

If your satellite tuner synchronizes the recording start time with the broadcasting start time, refer to the tuner’s owner’s manual.

When you turn on the VCR power, the AUTO SATELLITE LINK will be cancelled.

If the start time for a timer record- ing comes up during an Auto Satellite Link recording, the timer recording has priority.

Image 31
Contents VCR For Customer Use Warranty VerificationDeclaration of Conformity FeaturesSafety Precautions IntroductionTable of Contents VCR maintenance Before Using Your VCRPutting Batteries in the Remote Control Using the Remote ControlDisconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemCH3 CH4 Plug in the AC power cords of the TV and the VCRConnections Cable SignalRecording/Viewing Any Channel Cable SignalRecording One Channel/Watching Another Cable Box/DBSHookups With a Stereo TV Below will appear Turning on Your VCRPress the Menu button until the main menu appears Automatic Channel SetupAdding/Deleting Channels Automatic Channel Setup cont’dFollow the steps below to set your VCR’s clock. Make sure Setting the ClockYour selection will flash on the screen in the AM/PM space Setting the Clock cont’dLanguage Selection Press the Counter RESET/EXIT button to exitPress the Display button once Clock mode OFF mode Press the Display button once Count modeOn-Screen Status Displays Remote Control Buttons Index Search Button Counter RESET/EXIT ButtonEject Button Time Search ButtonVCR Display Panel Play Button Speed Button Power ButtonRemote Sensor FWD Fast Forward Button VCR/TV ButtonVideo in Jack AC Power CordRear Panel Video OUT JackVHS Quasi Play Back Sqpb PlayingRead and follow the steps below to play a tape 1Turn on the TV Insert a tape RecordingStarting an OTR One-Touch RecordingStopping an OTR Channels are set up Clock is set Timer RecordingRepeat the procedure in to set the recording’s end time Timer Recording cont’dEnter the recording’s start time Start Time END Time Channel REC Speed SLP Cancelling a Timer Recording Timer Recording cont’d42&5 Correcting a Timer RecordingSet the program to be recorded On the satellite tuner Auto Satellite Link Using a Satellite TunerPut the VCR in VCR position. The VCR/TV light will appear Press the VCR/TV button on the VCR remote control toRecording One Channel/Watching Another To return to the channel being recorded, use the TVAntenna Rerecording Tape DuplicationRepeat Play Viewing a Still Picture Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPPress the Play button or the Stop button repeatedly to Picture SelectSelect Picture SELECT. Then, press the F.FWD button Press the Play button to watch the tape Real-Time Counter MemoryPress the Index Search button Index SearchPress the Time Search button Time SearchPress the QUICK-FIND button Quick FindTo resume normal tape playback, press the Play button Automatic Playback Features Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel Channel 3 or GlossarySpecifications Renewed Index Supplied Accessories