O ik x¨v vˇˇ
0U ik1
With this function, the video recorder stores the channels in the same order as on the TV set. This only works if the video
recorder (socket ) and the TV set are x v xvwˇz
You must | any equipment connected to | ||
socket |
| . |
|
AV2 EXT2 |
|
aSwitch on the TV set. If required, select the programme number for the video recorder.
bPress MENU on the remote control. The main menu will appear on the screen.
MAIN MENU CLOCK AUTO TUNING MANUAL SEARCH FOLLOW TV
TV CHANNEL ALLOC. RECORD SPEED AUTO STANDBY
TV SYSTEM
LANGUAGE
SPECIAL SETTINGS
________________________________
… | EXITpMENU | OK |
† |
|
|
c Select the line ’FOLLOW TV’ with P or xP
and confirm with OK . Take notice of the message on the TV screen.
d Press OK . ’TV01’ will appear in the video recorder display.
i Confirm with OK on the video
If you have allocated the wrong TV channel, you can go back one step with CLEAR (CL) .
jRepeat steps gto juntil all TV channels have been allocated.
kTo end, press MENU .
O ik x¨v
The video recorder will search for all available TV channels.
If you want to start the automatic TV channel search again, then follow the instructions below.
aSwitch on the TV set. If required, select the programme number for the video recorder.
bPress MENU on the remote control. The main menu will appear on the screen.
c Select the line ’AUTO TUNING’ with P or
xP | . |
dConfirm with OK .
e Select the country of your residence with | xP | or |
P.
If your country doesn’t show up, select ’OTHERS’.
f Press OK . The ’Automatic TV channel search’ starts.
TV01
e Select programme number ’1’ ik .
f Confirm with OK on the video
When the video recorder finds the same TV channel as the TV set, then it stores it at ’P01’.
When ’NOTV’ (no signal from TV set) appears in the display, the TV channels can not be allocated automatically. In this case, read paragraph: ’Manual TV channel allocation’.
gWait until e.g.: ’TV02’ appears.
h Select the next programme number, e.g.: ’2’ ik | . |
AUTO TUNING
SEARCHING
00 TV CHANNELS FOUND
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
gWhen the TV channel search is complete, ’STORED’ will appear on the screen.
hTo end, press MENU .
How to search for a TV channel manually, you can read in the section ’Manual TV channel search’.
8