If any of the TIMER blocks are in use, ’ ’ will light up on the video recorder display.
While a programmed recording is being made, you cannot operate your video recorder manually. If you want to cancel the programmed recording, press
STANDBY/ON .
If you reach the end of the cassette during a recording, the video recorder will automatically eject the cassette.
If you forget to load a cassette, ’CASS’ will briefly appear in the display and then ’ ’ will flash in the video recorder display.
If you have put in a cassette which cannot be used for recording, the video recorder will automatically eject it.
If ’FULL’ appears in the display when you press TURBO TIMER , you have used up all the available TIMER blocks. You can find more information on how to clear or check a programmed recording (TIMER block) in the next chapter.
Wxˇzv v 0iXbTg1
aSwitch on the TV set and select the programme number for the video recorder.
b Press | TIMER | on the remote control | . |
cSelect the programmed recording (TIMER) you want to
clear with | P | or | xP | . |
dPress CLEAR (CL) .
The programmed recording (TIMER) has now been deleted.
e To end, press MENU .
Wx¨zx˝ x¨v v 0iXbTg1
aSwitch on the TV set and select the programme number for the video recorder.
bPress
TIMER
on the remote control | . |
cSelect the programmed recording (TIMER) you want to
check or change with | P | or | xP | . |
dPress
TIMER
.
e Select the entry field with |
|
| or |
|
| . |
|
| ||
f Change any information with |
|
|
|
| or |
| or with | |||
| P |
|
| xP | ||||||
the |
| number buttons. |
|
|
|
|
|
| ||
|
|
|
|
|
| |||||
g Confirm with OK .
hMake sure that the cassette you have put in can be
recorded on. Switch off with STANDBY/ON .
The programmed recording will only function when
the video recorder iswith
STANDBY/ON .
23