Hzˇzx

Your video recorder remote control can transmit several commands to TV sets of different makes.

By using the ik buttons on the panel in the middle of the control, you can:

increase the TV volume reduce the TV volume switch off sound switch off the TV set next programme number previous programme number

a Hold TV and enter the correct remote control command with the number buttons 0-9 .

You will find a list of all available remote control commands on the last page of this manual.

If the selected code does not work with your TV set, or if the make of your TV is not in the list, you can try out the codes one after the other.

You can select the required sound track. This is of particular interest when the audio transmissions are multilingual.

aPress SELECT

b By pressing SELECT several times you can select from the four possibilities displayed (’STEREO’, ’RIGHT’, ’LEFT’, ’MONO’, ’MIXED’).

Dubbed sound recordings can be replayed with the ’MONO’ or ’MIXED’ setting.

’MONO’: Dubbed (linear) sound track.

’MIXED’: Original sound (hi-fi sound track) together with dubbed sound (linear sound track).

If the cassette does not have stereo sound recorded on it, the video recorder will automatically switch to mono.