Philips VR605A/58 manual XchiOaaXcV ndjg kXSTd gTRdgSTg, Oˇˇ v yzx

:6 XchiOaaXcV ndjg kXSTd gTRdgSTg

X ˚

a Confirm the picture on the TV screen with OK on the remote control.

bSelect the language for the on-screen display (OSD) with

P or xP .

The display on the video recorder will only show english text.

cConfirm with OK .

d Select the country of your residence with			P	or
		.
	xP

If this country does not show up, select ’OTHERS’.

Confirm with OK .

’Automatic TV channel search’ starts. This picture will appear on the screen:

AUTO TUNING

SEARCHING

00 TV CHANNELS FOUND

ƒƒƒƒƒƒƒ__________________

PLEASE WAIT...

Wait until all TV channels have been found. This can take several minutes.

eWhen all TV channels have been found, ’STORED’ will

appear on the TV screen.

’YEAR’, ’MONTH’, ’DATE’, ’TIME’ will appear on the TV screen.

CLOCK
YEAR	è 2000 p
MONTH	01
DATE	01
TIME	20:00

________________________________

EXITpMENUSTOREpOK

hCheck ’MONTH’ and ’DATE’ , ’TIME’ in the same way.

i When all the information is correct, confirm with OK . The initial installation is now complete.

If you have connected a satellite receiver, please read the section ’Satellite receiver’.

If you have connected a decoder, you must install it as described in the next section.

If you experience sound distortion or no sound at all with some TV channels, you may have selected the wrong TV system for these TV channels. In the chapter ’Manual TV channel search’ you will find the information on how to change the TV system.

Oˇˇ v yzx

Some TV stations will send coded TV channels, that you can only watch when you use a decoder. You can connect such a decoder (descrambler) to your video recorder. With the following function, the connected decoder will automatically be activated for the TV programme you want to watch.

aSwitch on the TV set. If required, select the programme number for the video recorder.

b On the video recorder, use xP or P or number

buttons 0-9on the remote control to select the programme number you want to allocate the decoder to.

cPress MENU on the remote control. The main menu will appear.

d Select the line ’MANUAL SEARCH’ with						or
					xP
		and confirm with		.
	P		OK
		MANUAL SEARCH
		PROGRAMME NUMBER è P01			p
		S-CHANNEL		NO
		CHANNEL NUMBER	21
		DECODER		OFF
		TV SYSTEM		AUTO
		NICAM		ON
		________________________________
		EXITpMENU	STOREpOK

fCheck if the year in line ’YEAR’ is correct. Change it if

required with the number buttons			0-9	on the remote
control.
g Select the next line with		or			.
	xP			P

e Select the line ’DECODER’ with			or		.
		P		xP
f Select function ’ON’ with	or	.

When you select ’OFF’, the decoder will not be allocated.

6