The programming information has been stored in a TIMER block.
gMake sure that the cassette you have put in can be recorded on.
h Switch off with |
| STANDBY/ON | . |
|
|
The programmed recording will only function when the | |||||
video recorder is | with |
| . | ||
STANDBY/ON | |||||
If any of the TIMER blocks are in use, ’ ’ will light up on the video recorder display.
While a programmed recording is being made, you cannot operate your video recorder manually. If you want to cancel the programmed recording, press
STANDBY/ON .
If the video recorder is switched on a few minutes
before a programmed recording is supposed to begin, ’SWITCH TO STANDBY- TIMER RECORDING’ will flash on the TV screen.
If you reach the end of the cassette during a recording, the video recorder will automatically eject the cassette.
If you forget to load a cassette, ’NO CASSETTE’ will appear on the TV screen and ’ ’ will flash on the video recorder display.
If you have put in a cassette which cannot be used for recording, the video recorder will automatically eject it.
If ’ALL TIMERS OCCUPIED’ appears on the TV screen when you press TIMER , you have used up all the available TIMER blocks. If you want to clear
or check a TIMER block, select it with | xP | or | |
| . |
| |
P |
| ||
Programme numbers ’E1’ and ’E2’ are for recordings from other sources (through scart socket AV1 EXT1 or AV2 EXT2 ).
e v
0 /hWdlkXTl/1
aSwitch on the TV set and select the programme number for the video recorder.
b Press | TIMER | on the remote control | . The free | |
TIMER block will be highlighted. |
|
| ||
c Press |
| . The information will appear on the | ||
TIMER | ||||
screen. |
|
| ||
| TIMER |
|
| |
|
| VPS |
|
|
| DATE REP. PROG. START PDC | END |
| |
| 21 | 21:30 |
| |
________________________________
STOREpOK
d With |
|
| , | or | you can select ’DATE’ (date), | |||
TIMER | ||||||||
| ’PROG.’ (programme number), ’START’ (start time) and | |||||||
| ’END’ (end time). |
|
|
|
| |||
| Enter or change your information with |
| or | |||||
xP | ||||||||
|
|
| , or with the number buttons |
| ||||
| P |
|
| |||||
Under ’DATE’, use the SELECT button to select daily or weekly programming.
/ONCE/: Recording once
/WEEK./: Recording every week on the same day.
Under ’START’, use SELECT to switch ’VPS/PDC’ on or off. If ’]’ appears in the display, ’VPS/PDC’ has been switched off.
eConfirm with OK when the information is correct.
The programming information has been stored in a TIMER block.
fMake sure that the cassette you have put in can be recorded on.
g Switch off with |
| STANDBY/ON |
|
|
|
The programmed recording will only function when the | |||||
video recorder is | with |
| . | ||
STANDBY/ON | |||||
If any of the TIMER blocks are in use, ’ ’ will light up on the video recorder display.
21