B6 eaOnPORZ UjcRiXdch
eˇv v xv
a Put a cassette into the cassette slot. ’ ’ will appear on the display.
b Press the | PLAY | button. |
This will, for example, appear in the display.
0:00:02
c To stop, press the STOP button.
d To eject the cassette, press STOP/EJECT on the video
recorder when the video recorder is in STOP mode.
Some functions switch off automatically after a while (for example, pause, still picture, picture search). This helps to protect the cassette and avoids wasting power.
For playback, the correct recording speed will automatically be selected. Please read the section ’Selecting the recording speed (SP or LP)’ in the chapter ’MANUAL RECORDING’.
eˇv cihR xv
With this set you can playback cassettes that have been recorded on another video recorder in the NTSC standard (for example, American cassettes). But this only works for
When you play an NTSC cassette ’60HZ’ will appear on the display.
Some special features (for example, still picture) are not possible while you are playing an NTSC cassette.
iv ˚
When playing a tape, by pressing the OK button, you can show the present tape position on the TV screen.
You have a choise of selecting ’LINEAR’ or ’T.LEFT’.
•’LINEAR’ will show the tape position in hours, minutes and seconds.
•’T.LEFT’ will show the actual amount of playing/recording time left on the tape in hours and minutes.
When you play an NTSC cassette, the video recorder will only show ’LINEAR’.
aSwitch on the TV set. If required, select the programme number for the video recorder.
bPress MENU on the remote control. The main menu will appear.
c Select the line ’SPECIAL SETTINGS’ with |
| or | |||||
xP | |||||||
|
| and confirm with |
| . |
|
|
|
| P | OK |
|
|
| ||
|
| SPECIAL SETTINGS |
|
|
| ||
|
| OSD |
| è ON | p |
| |
|
| CLOCK DISPLAY |
| OFF |
|
|
|
|
| COUNTER |
| T.LEFT |
|
|
|
|
| SAT RECORDING |
| OFF |
|
|
|
|
| REPEAT PLAY |
| OFF |
|
|
|
|
| DIRECT RECORD |
| OFF |
|
|
|
|
| ________________________________ |
|
| |||
|
| EXITpMENU | STOREpOK |
|
|
| |
d Select the line ’COUNTER’ with |
| or |
| . |
xP | P |
eSelect ’LINEAR’ or ’T.LEFT’ with 
or 
and confirm with OK .
The counter ’LINEAR’ will be set to ’0:00:00’ when you put a cassette in the machine. You can also reset the tape position to ’0:00:00’ when you press 
.
If you rewind a cassette from the tape position ’0:00:00’, the counter ’LINEAR’ will show for instance,
If there is an empty space on the tape, the counter ’LINEAR’ will stop running.
14