Philips VR605A/58 manual Gzy y˚

gzy y˚ 5

ı

You may experience picture disturbance if you have not used a scart cable to connect your video recorder and TV. This is because another TV station in your reception area may already be using UHF-channel CH36 or 591MHz. When the video recorder is switched on, the picture quality of some TV channels received on the TV is poor.

You may optimize the picture quality by changing the modulator frequency (591MHz or UHF channel 36).

aSwitch on the TV set and select the programme number for the video recorder playback (see your TV operating manual).

b Make sure that there is						cassette in the video recorder.
c Hold				on the remote control and
		STOP
					on the video recorder at the same time,
	STOP/EJECT
	until, for instance, ’M591’ appears in the display.
	The video recorder transmits a test picture on
	UHF-channel 36 or frequency 591MHz.
		OPTIMIZE MODULATOR
			OPTIMIZE FREQUENCYè 591 p
			MODULATOR			ON
			SOUND SYSTEM			K
________________________________
		EXITpMENU				STOREpOK

dSelect the line ’OPTIMIZE FREQUENCY’ with

xP or P . Enter the Modulator frequency with

the number buttons 0-9 .

eTune in the TV set to the new modulator frequency shown in the video recorder display.

If the picture or sound quality is poor, you may have

selected the wrong TV system.

In the line ’SOUND SYSTEM’ select the required TV system, for instance, ’G’ (for TV-system PAL-B,G) or

’K’ (for TV-system SECAM-D,K) using or .

fConfirm with OK .

’OK’ will briefly appear in the video recorder display.

Optimizing the modulator is now complete.

h ı

If you cannot clear picture or sound interference, you can switch off the built-in modulator. You can only switch off the modulator if you have connected the video recorder to the TV set with a scart cable. ’Connecting VCR without scart cable’ is not possible when the modulator is switched off.

aSwitch on the TV set and select the programme number for the video recorder.

b Make sure that there is cassette in the video recorder.

cPress STOP/EJECT on the video recorder and

STOP on the remote control v for

several seconds, until, for example, ’M591’ appears on the video recorder display.

OPTIMIZE MODULATOR
OPTIMIZE FREQUENCYè	591 p
MODULATOR	ON
SOUND SYSTEM	K

________________________________

EXITpMENUSTOREpOK

dSelect the line ’MODULATOR’ on the TV screen or ’MOD+’

in the display with		xP	or	P	.
e With	, select the function ’OFF’ on the TV screen or

’MOD-’ (modulator off) in the display.

If you want to switch the modulator on again, select ’MOD+’ (modulator on) in the video recorder display

with .

fConfirm with OK .

g To end, press MENU .

26