Graco 312787G important safety instructions Color Change Module Kits

Page 1

Instructions-Parts

Color Change
Module Kits	EN
	312787G

Includes color change valve stack and control module to add or expand color change

function on ProMix® 2KS and ProMix 3KS Electronic Proportioners. For professional use only.

Approved for use in explosive atmospheres only when used in conjunction with ProMix 2KS or ProMix 3KS Electronic Proportioners.

See page 3 for model information, including maximum working pressure.

Important Safety Instructions

Read all warnings and instructions in this manual. For complete warnings and instructions see your proportioning system manual. Hazard symbols refer to specific procedure risks. Save all instruc- tions.

Color Change Kit shown installed in a

ProMix 2KS Proportioning System

TI12828b

Image 1

Contents Color Change Module Kits Important Safety InstructionsRelated Manuals ContentsLow Pressure Kits ModelsHigh Pressure Kits Kit Part No Series DescriptionInstall Color Change Control Module InstallationLocation MountingConnect Module to Fluid Station Board To Install a Second Control ModuleConnect Air Supply to Control Module Intrinsically Safe can Cables Length in ft mInstallation Color Change Board Switch Settings Install Color Valve StacksAccessory Dump Valve Kit Connect Valve Air LinesOne Color Change Board Color Change Board Switch Settings for ProMix 3KS SystemsPositions IG Color Change Board Switch SettingsCause Solution TroubleshootingProblem Cause Solution Color Change Solenoid ValvesReplace the Color Change Board Fuse Replace a SolenoidFuse Description 123690 Fuse 125 mA, intrinsically safe 256172 Color Change Board Color Change Board DiagnosticsPin Nos Description Diagnosis Replace the Color Change BoardSystem Pneumatic Diagram Schematic DiagramsColor Change Module Electrical Schematic Wiring DiagramNon-Hazardous Area System Electrical SchematicBoard Hazardous AreaLow Pressure Color Change Kits PartsHigh Pressure Color Change Kits Color Change Kits Parts Ref. No see Color Change Control ModulesControl Module Part Quantities Description QtyTI12826a Description Qty 277752 2-Color Control Module278095 1 Catalyst/1 Flush Control Module 0 Color Dimensions Control Module Weight, lb kg Technical DataGraco Information Graco Standard Warranty