Stanley Black & Decker EP30250 user manual Brazing instruction

Page 11

EP30250 OPERATION

3. Brazing instruction.

WARNING

Warning! Always use eye protectors when grinding and brazing!

Note, use only STANLEY´s grinding wheel specially made for brazing, other type of wheels will leave a surface not suitable for brazings. Keep the grinding wheel clean and free from oil etc.

IMPORTANT

- Grind the brazing and grounding area until you have an even and clean surface

Move the grinder up and down until you have an even surface for both the pinbraze and ground magnet.

-Attach the earth magnet on the same rail/work piece where the pinbrazing should be done. Try to attach the magnet within 0,5m from brazing area.

- Set pintype:

Setting

Pin

8 mm std

1

8 mm Extra

2

9,5 mm

3

- Load the gun with brazing pin and ferrule.

EP30200 / EP30250 User Manual ◄ 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents EP30 Weisbeck, Andy Declaration of ConformityTable of Contents Local Safety Regulations Safety SymbolsSafety Precautions EP30200 Operation Initial Setup and Battery ChargingChanging PIN and Ring Holder Select Pins and RingsPrepare the Rail Surface Placing the Grounding CableSET Control for PIN Size Adjusting Brazing PIN Distance to Braze SurfaceLoading PIN and Ring EP30 does not have a power switch Connect EP30250 OperationCheck that all parts were received Brazing instruction Brazing Accessories EP300PIN Holders EP30250 MaintenanceEP30200 TroubleshootingEP30250 Equipment Maintenance & Care Accessories SpecificationsCable Lugs for Pin Brazing to rail Brazing Pins & Ceramic Rings Standard Brazing PinsCeramic Rings PIN & Ring HoldersBonding Cable with Lugs for Pin Brazing ConnectorsFuses, Chargers, & Batteries Grinder AbrasivesGrinder CablesTools GunsPlugs EP30 Parts Illustration Internal Electronic Control BOX EP30 Parts List
Top Page Image Contents