Stanley Black & Decker EP30250 user manual Equipment Maintenance & Care

Page 15

EQUIPMENT MAINTENANCE & CARE

NOTICE

In addition to the Safety Precautions in this manual, observe the following for equipment protection and care.

•Check that the pin holder is not burnt or not holding the pin tightly. If not, remove the ring holder, clean all the parts and squeeze the fingers of the pin holder together.

•Check the cables on the gun from time to time for damage. Replace as required.

•Check that the lift level is correct with lift level tool.

•Always store the tool in a clean dry space, safe from damage or pilferage.

•Always keep critical equipment markings, such as warning stickers and tags legible.

•Equipment repair should be performed by experienced personnel only.

•Do not use the equipment for applications for which it was not intended.

EP30200 / EP30250 User Manual ◄ 15

Image 15

Contents EP30 Weisbeck, Andy Declaration of ConformityTable of Contents Local Safety Regulations Safety SymbolsSafety Precautions EP30200 Operation Initial Setup and Battery ChargingChanging PIN and Ring Holder Select Pins and RingsPrepare the Rail Surface Placing the Grounding CableAdjusting Brazing PIN Distance to Braze Surface Loading PIN and RingSET Control for PIN Size EP30 does not have a power switch EP30250 Operation Check that all parts were receivedConnect Brazing instruction Brazing Accessories EP300PIN Holders EP30250 MaintenanceTroubleshooting EP30250EP30200 Equipment Maintenance & Care Accessories SpecificationsCable Lugs for Pin Brazing to rail Brazing Pins & Ceramic Rings Standard Brazing PinsCeramic Rings PIN & Ring HoldersBonding Cable with Lugs for Pin Brazing ConnectorsFuses, Chargers, & Batteries Grinder AbrasivesGrinder CablesGuns PlugsTools EP30 Parts Illustration Internal Electronic Control BOX EP30 Parts List