Stanley Black & Decker user manual EP30250 Maintenance, PIN Holders

Page 13

EP30250 MAINTENANCE

PIN HOLDERS

Squeeze the fingers on the pin holder together each time you feel that the brazing pin goes in too easy when mounting them into the pin holder. This is important since all the current goes thru the pin holder to the brazing pin. If the fingers are too loose the pin holder will be damaged and must be replaced.

CHANGE PIN HOLDER

-Separate the ring holder from the gun with your hands. -Hold the nut closest to the pin holder with a 10mm key.

-Screw the pin holder off.

-When replacing the new pinholder, hold the nut, closest to the pinholder even now.

WARNING

WARNING! Never rotate the shaft! The internal cables may be damaged!

EQUIPMENT

-Check the cables from time to time, to make sure they are not damaged.

-Check the contact surface on the ground magnet from time to time and use a file to even or clean the surface.

BRAZING PINS AND FERRULES -Keep them dry.

RAILBONDS AND CABLE LUGS -Keep them free from oxidation.

-Keep them free from contamination like: Grease, oil, dirt, paint, glue etc. -Make sure that they are not damaged.

EP30200 / EP30250 User Manual ◄ 13

Image 13
Contents EP30 Weisbeck, Andy Declaration of ConformityTable of Contents Local Safety Regulations Safety SymbolsSafety Precautions EP30200 Operation Initial Setup and Battery ChargingPrepare the Rail Surface Select Pins and RingsPlacing the Grounding Cable Changing PIN and Ring HolderLoading PIN and Ring Adjusting Brazing PIN Distance to Braze SurfaceSET Control for PIN Size EP30 does not have a power switch Check that all parts were received EP30250 OperationConnect Brazing instruction Brazing Accessories EP300PIN Holders EP30250 MaintenanceEP30250 TroubleshootingEP30200 Equipment Maintenance & Care Accessories SpecificationsCeramic Rings Brazing Pins & Ceramic Rings Standard Brazing PinsPIN & Ring Holders Cable Lugs for Pin Brazing to railBonding Cable with Lugs for Pin Brazing ConnectorsFuses, Chargers, & Batteries Grinder AbrasivesGrinder CablesPlugs GunsTools EP30 Parts Illustration Internal Electronic Control BOX EP30 Parts List