EP30250 OPERATION
-Press carefully the gun with the cable shoe, the ferrule and the brazing pin to the work piece.
-Note that you always must use a railbond together with the brazing pin and the ferrule to do a pin brazing, except when brazing a special threaded brazing pin then only a ferrule and M8, M10 or M12 brazing pin is to be used.
-Make sure to braze in the top of the hole when brazing to a vertical surface.
Brazing.
-Hold the gun firmly with both hands as shown and pull the trigger just once.
The electronic will by it self finish the brazing process.
-Hold the gun in place for
-Remove the gun straight backwards without
pulling the trigger!
Knock off the shank of the brazing pin.
The brazing is completed.
ACCESSORIES EP300
SEE PAGE 17
Pin holder
Pin holder M8 (B)
Pin holder M10 (C)
Pin holder M12 (D)
Ring holder
Ring holder M8/M10/M12
12 ► EP30200 / EP30250 User Manual