Kawasaki P9723 owner manual Vehicle Operation, Drive, Reverse

Page 18

VEHICLE OPERATION

As assembled, your vehicle is ready to roll in low speed (2½ mph, maximum). It has been pre-set so it will only operate in low speed. After your child has mastered the basic skills of driving and understands the rules for safe driving, it’s time to connect the high speed connectors to allow the vehicle to operate in high speed. See the instructions on this page to connect the high speed connectors and operate the vehicle at high speed.

Beginner Use - Low Speed Drive

Advanced Use - High Speed Drive

Drive

•Press the DRIVE button on the tank.

•Press the foot pedal. The vehicle goes forward at a maximum of 2½ mph.

•Help your child practice steering to learn how far and how quickly to turn the handlebar when driving forward in low speed.

To Back Up

Reverse

IMPORTANT! To prevent damaging the motors and gears, teach your child to stop the vehicle before switching direction.

•Press the REVERSE button on the tank.

•Press the foot pedal. The vehicle backs up at a maximum of 2½ mph.

•Help your child practice steering to learn how far and how quickly to turn the handlebar when driving in reverse.

STOP!

•Your vehicle has a patented, electronic braking system that auto-matically stops the vehicle when your child’s foot lifts from the pedal.

•Make sure your child is comfortable with steering the vehicle and automatically knows how to stop.

•Remove the seat to access the high speed hook-up.

•Locate the high speed connector in the opening inside the front end of the vehicle. Plug the high speed connector (with yellow tag) into the matching connector (with yellow tag).

•Re-assemble the seat.

•To prevent operation of the vehicle in high-speed, simply disconnect the high speed connectors.

Twist Grip to Activate High Speed

•Turn the right grip to shift the vehicle into high speed. The vehicle drives forward at a maximum of 5 mph.

•Help your child practice steering to learn how far and how quickly to turn the handlebar when driving forward in high speed.

IMPORTANT! Use the vehicle ONLY outdoors. Most interior flooring can be damaged by riding the vehicle indoors. Fisher-Price®will not be responsible for damage to floors if vehicle is used indoors.

18

P9723pr-0920

Page 17 Page 19
Image 18
Page 17 Page 19
Contents With Assembly Instructions For Model P9723 Table of Contents Important InformationElectrical Hazard Parts HandlebarSeat Vehicle Steering Column Cap PlateFront Wheels Rear Wheels Front Clip 16 Hex Nut Rear Axle Volt Battery#8 x 2 Screw For your convenience, we included extra fastenersParts Picture 144Battery Charging Please callAssembly Power Indicator Battery Charger ConnectorRear Axle 16 Hex Nut Rear Wheel Driver Motor Assembly Rear Axle AssemblyMotor Assembly Rear Wheel Rear WheelSteering Column Connector Steering ColumnWrench 16 Hex Nut Front AxleBushing Wheel Cover HubcapsDrive Buttons 17Connector Brush Guard Hand GripDecoration SeatRight Side View Power Wheels Battery InstallationSeat Battery Retainer Motor Harness Seat Drive Buttons ConnectorBattery Care and Disposal CareSafe Driving Rules To disconnect the motor harnessVehicle Operation DriveReverse Vehicle Care Problems and Solutions Problem Possible Cause SolutionShort run time Less than Undercharged battery Operation of the drive system by raising the rear wheels off Limited Warranty Bumper-to-Bumper Limited WarrantyBefore first-time use You must charge the battery Hours
Top Page Image Contents