5• Make sure that the latch strap is threaded flat against the base.
6• Tighten the base against the seat by pulling the free end of the latch strap. Press down on the base with your body weight and tighten further. Check the level indicator. If the pointer has moved outside of the green area, turn the knob until the pointer is back within the green area. You may need to loosen the strap slightly to do this. Push and pull on the base. If you can move it more than 2,5 cm (1 inch), tighten the belt further.
• Now that you have installed the base, go to page 23.
16⇠
|
|
|
|
|
|