How to Use the Car Seat on Aircraft without Base
This unit is certified for aircraft use.
1• Position the restraint on the seat, adjust the handle so it rests at the top edge of the car seat as shown. Any other position may injure your baby in an accident. To move the handle, press the gray buttons on the sides of the handle at the same time and push the handle.
2• Adjust the restraint on the seat. Check the red line to see that the base is level with the ground. Thread the lap belt through the slots on the seat and lock the latch plate into the buckle as shown.
3• Pull the strap to tighten the seat belt. Press down on the seat with your body weight and pull the strap tighter. Once the seat is tight, check that the red line on the side of the car seat is level with the ground.
Important! Follow the harness instructions beginning with “How to Buckle Your Baby into the Car Seat” (on page 28) to safely secure your baby.
39⇠