Installing the Base with Different Types of Seat Belts
Primo Viaggio Sip ES 30•30 is designed for use with lap or lap/shoulder seat belts. Four of the most common types are listed below. Please read your vehicle manual for instructions on installing an infant car seat using your vehicle seat belts.
I Lap/Shoulder belt with Switchable Locking Retractor If your vehicle has Switchable Locking Retractor lap/shoulder belts, pull the shoulder strap all the way out, let it retract several inches, then pull it out again. It should lock in place to properly secure the base.
IILap/Shoulder belt with Emergency Locking Retractor (ELR) and free sliding latch plate This type of seat belt will only lock in an emergency, so you must use the locking clip (stored on infant seat base) to properly secure this type of seat belt (see page 21).
19⇠