Manual tuning allows you to store channel by channel.
You must go through every step of the manual store menu.
&Select MANUAL STOREin the INSTALL menu.
éPress the cursor right to enter the menu.
“Select COLOUR SYSTEM and press the cursor right.
If AUTO is selected,the respective colour system will be automatically
selected according to the transmission system.
If the reception is poor,select another colour system with the cursor up/down.
‘Press the MENU key or the cursor left.
(Select SOUND SYSTEM and press the cursor right.
If AUTO is selected,the respective sound system will be automatically
selected according to the transmission system.
Note:If the reception is poor, select another sound system with the cursor up/down.
§Press the MENU key or the cursor left.
èSelect SEARCH and press the cursor left or right to start the searching.
Searching stops once a transmitting channel is found.
Note:If the reception is poor, select another colour and/or sound system.
!Select CHANNEL.
çKey in the desired channel number with the digit keys or with the cursor
left/right.
0Press the cursor down.
In case of poor reception,you can improve the reception by adjusting the
frequency.
1Select FINE TUNE and press the cursor left/right to adjust.
2In rare cases certain TV channels may reproduce distorted or unstable
pictures.
Select PLL (Phase Locked Loop) to switch to the setting 2 with the cursor
left/right to restore the picture for the respective transmission.
3Press the cursor down to select STORE.
4Press the cursor right.
The message STOREDappears and the search menu item is highlighted again.
5Now repeat steps èto 4to continue searching for another transmitting
channel.
6Press the MENU key to return to the INSTALLmenu or press the ikey to
switch menu off.
5Installation
Manual tuning of channels
INSTALL
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
CHANNEL EDIT
NAME
MANUAL STORE
COLOUR SYSTEM
SOUND SYSTEM
SEARCH
CHANNEL
STORE/STORED
FINE TUNE
PLL