How to Use the Car Seat on Aircraft with Base
This unit is certified for aircraft use.
1• Buckle the base to the aircraft seat using the lap belt as shown. A secondary belt path can also be used as shown in Fig. B.
2• Position the base rear facing in the aircraft seat. Check the level indicator on the side of the base to make sure that the ball is in the green area. If it is not, turn the knob left or right until it is in the correct position.
3• Thread the lap belt through the slots on the base and lock the latch plate into the buckle.
4• Pull the seat belt strap to tighten the base down. Press your body weight down on the seat to tighten the belt further. Check the level and adjust if needed. Push and pull on the base. If you can move it more than one inch, tighten the belt further. Position the car seat rear facing over the base. Press the seat into the base until you hear the click. Make sure the seat is correctly locked in place.
40⇠