Safeline Sit'n'Stroll manual

Page 21

Lap/Shoulder Belt with Buckle Tongue that

Slides Freely Along Seat Belt Webbing

Freeslidinglap/shoulderbeltshaveafreeslidinglatch platethatdoesnotlocktothebelt. Whenplacingthe Sit’n’Stroll™inseatingpositionsequippedwiththis system,youmustusealockingcliptopreventtheseat beltfromslipping,unlessithasaswitchableretractor.

1.Place the vehicle lap belt around the front of the Sit’n’Stroll™ and position it through the appropriate forward-facing vehicle belt path. Click the latch plate into the buckle.

2.Push down firmly on the Sit’n’Stroll™ to sink it into the car’s seat cushion, while pulling on the shoulder part of the lap/shoulder belt. You may have to press on one armrest at a time to get the auto belt tight. Pull the seat belt as tight as possible across the unit.

3.Hold the lap and shoulder belts together behind the latch plate. Unbuckle the belt while holding the belts together.

4.Thread the locking clip onto both belts , placing it as close to the latch plate as possible .

5.Buckle the vehicle belt again. It may be necessary to press the Sit’n’Stroll™ into the auto seat cushion to get it buckled. The belt should be tight around the restraint. If it is not, remove the locking clip and repeat steps 1-4. If the child restraint cannot be held tightly, move it to another seating location. If there is not a position that will keep the child restraint secured with a lap belt, contact your vehicle dealer to have a lap belt installed in your vehicle.

6.Secure the top tether to the vehicle tether anchor if desired.

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Page Page Limited Six Month Warranty International Patents and Descriptions Table of ContentsFor children who weigh Less than 28 pounds Get to Know Your Sit’n’StrollSafetyGuidelines Important Notes Page Rear Facing Proper adjustment of the harness system for use rear-facingForward Facing Shoulder Belt Slots Seethedrawingsbelowforfurtherclarification CorrectPosition Choosing an AppropriateVehicle Seat LocationInstalling the Sit’n’Stroll in the Vehicle Lap Shoulder Belts with Sewn Latch Plates Automatic passive Seat BeltsManually Adjusted Lap Belts and Locking Latch Plates Switchable retractor Switchable RetractorsForward-Facing Installing the Sit’n’Stroll in theVehicleAutomatic passive Seat Belts Lap Shoulder Belts with Sewn Latch Plates Be sure the vehicle seat belts are not twisted Page TopTether Information Installing theTopTether with the Sit’n’Stroll Rear FacingConverting the Sit’n’Stroll fr om Car Seat to Stroller Installing the Sit’n’Stroll on an AircraftHandle Slot Slider Grip Operating the Sit’n’Stroll Brakes 3.4 Converting the Sit’n’Stroll fr om Stroller to Car SeatSit’n’Stroll Sunshade Attaching the SunshadeRemoving the Sunshade Tips Removing the Harness Installing the HarnessReplacement Parts Maintenance and CareWashing the Cover and Harness Washing the ShellVehicle Manufacturer Contact Telephone Numbers and Websites
Top Page Image Contents