Philips SCD609, SCD610 Menu, Zoom & Pan, Voice activation, Adjust brightness, Add/delete cameras

Page 15

6 Menu

1Press menu button on the parent unit. » Menu is displayed.

2Press +/- to move up or down the memu/ submenu, and press/to move left or right across menu/submenu.

3

4 To exit, press .

Zoom & Pan

1Press menu button.

2Select [ZOOM & PAN] from the menu to zoom in and out the view, and pan your view.

Menu option

Description

[ZOOM+]

Zoom in the view

[PAN]

Pan the view to adjust

 

the focus of the view

[ZOOM-]

Zoom out the view

Voice activation

Voice activation

When the voice activation mode is on, the video display only switches on when the baby unit picks up a sound. As long as no sound is detected, the video display is off to save power. When you press a key or a sound is detected, the parent unit is activated, and will be off again after 20 seconds time-out.The timer is reset each time when:

A sound exceeds the set voice activation sensitivity.

One button on parent unit (menu, +, -, , ) is pressed on.

Turn on voice activation

Press the buttonon the side of the parent unit, and the voice activation indicator slowly blinks.

Change voice activation sensitivity

1Press menu button on the parent unit.

2Select [VOICE ACTIVATION SENSITIVITY] of the baby unit.

Menu option

Description

[HIGH]

High voice activation sensitivity

[MID]

Medium voice activation

 

sensitivity

[LOW]

Low voice activation sensitivity

Note

When voice activation is active, the LOOP ALL CAMs in the switch CAM dialogue is not available.

When the LOOP ALL CAMs is active, the VOICE ACTIVATION function is not available. An info screen will be shown when you press the VOX button.

When [VOICE ACTIVATION SENSITIVITY] is set higher,it picks up a softer sound.

Adjust brightness

1Press menu button on the parent unit.

2Select [ADJUST BRIGHTNESS].

3Press +/- to adjust the brightness of the video display.

Add/delete cameras

Add a new camera

A maximum of 4 cameras can be paired to a parent unit.The menu has 4 positions named CAM1 up to CAM4.Your default setting will be at CAM1.You can select any of the positions in the list to assign a camera. It is up to you to decide which camera is which item in the list.

16EN

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Register your product and get support at Contents Congratulations on your purchase and welcome IntroductionPage That produce heat Important Safety InstructionsDispose of used batteries according to instructions Clean the parent unit and baby unit with a damp clothReplacement If you need to replace the adapters, use Use the supplied adapter to charge the parent unitThis Philips Avent appliance complies with all Compliance informationRadio interference Reorient or relocate the receiving antennaRecycling Parent unit OverviewBaby unit Charge the parent unit Get startedWall mount the baby unit Set up the baby unit14 EN Parent unit beeps from time to time Use your baby monitorOperating range To see your baby Press on the parent/baby unitVoice activation Adjust brightnessMenu Zoom & PanMenu option Description English French Change the languageSelect ADD CAM Loop all camerasReset Long period of time Guarantee and serviceWarranty Full two-year warrantyIncrease the volume Connect the unit to a powerSwitch on Power supply Supply Battery is empty Baby unit is switched off Switch on the baby unitDecrease the volume Battery light on the parentRecharge the battery Parent unit is running low Battery of the parent unitNight vision LED is still on Baby units light sensor BatteryUnclear in night vision Baby unit may be too Long Feet away from the babySCD610609
Top Page Image Contents