Tip
Charging normally takes 5 hours, but it takes longer when the parent unit is switched on during charging.To keep the charging time as short as possible, switch off the parent unit during charging.
When the battery is fully charged, the parent unit can be used cordlessly for approximately 7 hours if it is in voice activation mode. If the video is on continuously, the parent unit can be used cordlessly for approx. 5 hours.
4Insert the plug into the baby unit and put the adapter in a wall socket.
Set up the baby unit
Caution
Keep the baby unit out of the reach of the baby. Never place the baby unit inside or mount it on the baby's bed or playpen.
Note
If you use wireless devices, microwave oven or a DECT- system and you experience interference on either the parent unit or baby unit, move the parent unit further away until there is no more interference.
1Place the baby unit at least 1 meter/3.5 feet away from your baby.
2Place the baby unit on a stable surface. You may also mount the baby unit on a wall mount which is provided. For more information, please refer to the next section.
3Adjust the position of the baby unit in a way that ensures the best visibility of your baby.
5Place the parent unit within the operation range of the baby unit. Make sure it is at least 1.5 metre/5 feet away from the baby unit to avoid acoustic feedback.
6For more information on the operating range, see section "Operating range" below.
Tip
Position the baby unit at a higher level to get a good overview of the baby's bed or playpen.
Wall mount the baby unit
Caution
When the baby unit is wall mounted, manage the
accessible by the baby.
1Use the paper template to mark the positions of the three screws to wall mount your baby unit.
2Drill holes at the three positions.
3Place wall plugs in the wall.
EN 13