w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Setting Up a Printer

CAUTION: Before performing these procedures, read the safety instructions on page 11.

NOTICE: Complete the operating system setup before you connect a printer to the computer.

See the documentation that came with the printer for setup information, including how to:

Obtain and install updated drivers.

Connect the printer to the computer.

Load paper and install the toner or ink cartridge.

Contact the printer manufacturer for technical assistance.

Printer Cable

Your printer connects to your computer with either a USB cable or a parallel cable. Your printer may not come with a printer cable, so if you purchase a cable separately, ensure that it is compatible with your printer. If you purchased a printer cable at the same time you purchased your computer, the cable may arrive in the computer box.

Connecting a Parallel Printer

1Complete the operating system setup, if you have not already done so.

2Shut down the computer (see "Turning Off Your Computer" on page 42).

NOTICE: For best results, use a 3-m (10-ft) or shorter parallel cable.

3Attach the parallel printer cable to the parallel connector on the computer and tighten the two screws. Attach the cable to the connector on the printer and snap the two clips into the two notches.

38

Setting Up Your Computer

Page 38
Image 38
Dell 500m manual Setting Up a Printer, Printer Cable, Connecting a Parallel Printer