52 Using Batteries and Module Bay Devices
www.dell.com | support.dell.com
Removing and Installing Devices While the Computer Is Turned Off
CAUTION: Before performing these procedures, read the safety instructions on
page 11.
NOTE: If the device screw is not installed, you can remove and install devices while the
computer is running and connected to a docki ng device (docked).
Your computer ships with an optical drive installed in the module bay. However, the device
screw is not installed in the optical drive but packaged separately. When you install your
device in the module bay, you can install the dev i ce scr ew.
NOTE: You do not need to install the device screw unless you want to secure the module inside
the computer for security p urposes.
status button on the battery
charge gauge
second battery (bottom)
3Y647bk0.book Page 52 Wednesday, April 2, 2003 3:24 PM